Non disponibile 
| Dimensions | Width: 73.2 mm Height: 119.8 mm Depth: 71.5 mm Note on dimensions: Housing dimensions |
| Interfaces | Inline local bus No. of channels: 2 Connection method: Inline data jumper Transmission speed: 500 kbps / 2 Mbps (can be switched) |
| System properties | Module ID code (dec.): 167 ID code (hex): A7 Length code (hex): 04 Length code (dec): 04 Process data channel: 8 Byte Input address area: 8 Byte ((Operating mode: SafetyBridge)) Output address area: 8 Byte ((Operating mode: SafetyBridge)) Register length: 8 Byte Required parameter data: 1 Byte ((Operating mode: SafetyBridge)) Required configuration data: 5 Byte ((Operating mode: SafetyBridge)) |
| Output data | Relay Number of outputs: 4 (Safety relays with 2 floating contacts each) Connection method: Spring-cage connection Contact switching type: N/O contact |
| Product properties | Type: modular Product type: I/O component Product family: Inline Application: Functional safety PROFIsafe |
| Electrical properties | Maximum power dissipation for nominal condition: 8.7 W Transmission medium: Copper Potentials: Communications power (U Supply voltage: 7.5 VDC (see safety data) Current draw: max. 360 mA Potentials: Main circuit supply (U Supply voltage: 24 VDC Supply voltage range: 19.2 VDC ... 30 VDC (including all tolerances, including ripple) Current draw: max. 0.03 A typ. 30 mA (all outputs set including actuator current) Potentials: Segment circuit supply (U Supply voltage: 24 V Supply: Module electronics Supply voltage: 24 VDC (via voltage jumper) Supply voltage range: 19.2 VDC ... 30 VDC Electrical isolation/isolation of the voltage ranges Test voltage: 5 V supply, incoming remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: 5 V supply, outgoing remote bus/7.5 V supply (bus logics): 500 VAC, 50 Hz, 1 min. Test voltage: 7.5 V supply (bus logics)/24 V supply (I/O): 500 VAC, 50 Hz, 1 min. Test voltage: 24 V supply (UM, US), GND, clock outputs/7.5 V supply (bus logic), relay outputs: 500 VAC, 50 Hz, 1 min. Test voltage: COMBICON X3 relay outputs/COMBICON X4 relay outputs, Inline connector relay outputs,7.5 V supply (bus logic), 24 V supply (UM, US), GND, clock outputs, FE: 2500 VAC, 50 Hz, 1 min. Test voltage: COMBICON X4 relay outputs/COMBICON X3 relay outputs, Inline connector relay outputs,7.5 V supply (bus logic), 24 V supply (UM, US), GND, clock outputs,: 2500 VAC, 50 Hz, 1 min. |
| Connection data | Connection technology Connection name: Inline connector pluggable: yes Conductor connection Connection method: Spring-cage connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Inline connector Connection method: Spring-cage connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 |
| Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -25°C ... 55°C Degree of protection: IP20 Air pressure (operation): 80 kPa ... 108 kPa (up to 2000m above sea level) Air pressure (storage/transport): 66 kPa ... 108 kPa (up to 3500m above sea level) Ambient temperature (storage/transport): -25°C ... 70°C Permissible humidity (operation): 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) Permissible humidity (storage/transport): 10 % ... 85 % (Take suitable measures against increased air humidity within the permitted temperature range.) |
| Standards and regulations | Protection class: I (IEC 61140, EN61140, VDE0140-1) |
| Mounting | Mounting type: DIN rail mounting |
| ECLASS | ECLASS-11.0: 27242604 ECLASS-12.0: 27242604 ECLASS-13.0: 27242604 |
| ETIM | ETIM 9.0: EC001599 |
| UNSPSC | UNSPSC 21.0: 32151600 |
Di seguito alcuni articoli correlati a quello che stai vedendo
