3002370 PHOENIX CONTACT - Technology Bsa

PTU 35/4X10 BU - Potential collective terminal

Potential collective terminal, nom. voltage: 1000 V, nominal current: 101 A, number of connections: 5, connection method: Screw connection, Rated cross section: 35 mm², cross section: 1.5 mm²-50 mm², Push-in connection, Rated cross section: 10 mm², cross section: 0.5 mm²-16 mm², mounting type: NS 35/7,5, NS35/15, color: blue

Cod. Articolo: 3002370

Cod. Fornitore: 3002370

PHOENIX CONTACT

Notes	General: In the end application, the applicable safety regulations for overload and short-circuit protection on the connected conductors must be considered.
Product properties	Product type: Potential distributor Number of connections: 5 Number of rows: 1 Potentials: 1 Insulation characteristics Overvoltage category: III Degree of pollution: 2
Electrical properties	Rated surge voltage: 8 kV Maximum power dissipation for nominal condition: 2.43 W
Connection data	Number of connections per level: 5 Screw thread: M6 Tightening torque: 3.2 ... 3.7 Nm Stripping length: 18 mm ... 20 mm Internal cylindrical gage: B9 Connection in acc. with standard: IEC 60947-7-1 Conductor cross section rigid: 1.5 mm² ... 50 mm² 0.5 mm² ... 16 mm² Cross section AWG: 14 ... 2 (converted acc. to IEC) 20 ... 6 (converted acc. to IEC) Conductor cross section flexible: 1.5 mm² ... 35 mm² 0.5 mm² ... 10 mm² Conductor cross section, flexible [AWG]: 14 ... 2 (converted acc. to IEC) 20 ... 8 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve): 1.5 mm² ... 35 mm² 0.5 mm² ... 10 mm² Flexible conductor cross section (ferrule with plastic sleeve): 1.5 mm² ... 35 mm² 0.5 mm² ... 10 mm² Conductor cross-section flexible (2 conductors with the same cross-section, with TWIN ferrule and plastic sleeve): 1.5 mm² ... 10 mm² 1.5 mm² ... 4 mm² 2 conductors with same cross section, solid: 1.5 mm² ... 16 mm² 2 conductors with the same cross-section AWG rigid: 16 ... 6 (converted acc. to IEC) 2 conductors with same cross section, flexible: 1.5 mm² ... 10 mm² 2 conductors with the same cross-section AWG flexible: 16 ... 8 (converted acc. to IEC) 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 1.5 mm² ... 10 mm² Nominal current: 101 A 57 A Maximum load current: 101 A (The maximum load current must not be exceeded by the total current of all connected conductors.) 57 A Nominal voltage: 1000 V Nominal cross section: 35 mm² 10 mm² Connection cross sections directly pluggable Conductor cross section rigid: 1 mm² ... 16 mm² Conductor cross section, rigid [AWG]: 16 ... 6 (converted acc. to IEC) Conductor cross section flexible: 4 mm² ... 10 mm²
Dimensions	Width: 19.4 mm Height: 79.9 mm Depth on NS35/7,5: 50.3 mm Depth on NS35/15: 57.8 mm
Material specifications	Color: blue Flammability rating according to UL 94: V0 Insulating material group: I Insulating material: PA
Mechanical properties	Mechanical data Open side panel: No
Environmental and real-life conditions	Ambient conditions Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C) Ambient temperature (assembly): -5°C ... 70°C Ambient temperature (actuation): -5°C ... 70°C Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulations	Connection in acc. with standard: IEC 60947-7-1
Mounting	Mounting type: NS 35/7,5 NS35/15