Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 3040847
PHOENIX CONTACTNon disponibile

ST 2,5-TWIN-TG/1P - Disconnect terminal block

Disconnect terminal block, The max. load current must not be exceeded by the total current of all connected conductors.
Current and voltage are determined by the plug used., nom. voltage:400 V, nominal current:20 A, 1st level connection left, connection method: Spring-cage/plug-in connection, Rated cross section:2.5 mm2, cross section:0.08 mm2-4 mm2, mounting: NS 35/7,5, NS35/15, color:gray
Cod. Articolo: 3040847
Cod. Fornitore: 3040847
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Download
Caratteristiche Tecniche
NotesGeneral: The max. load current must not be exceeded by the total current of all connected conductors.
Current and voltage are determined by the plug used.
Product propertiesProduct type: Disconnect terminal block
Area of application: Railway industry
Machine building
Plant engineering
Number of connections: 2
Number of rows: 1
Potentials: 1
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 6 kV
Maximum power dissipation for nominal condition: 0.77 W
Connection dataNumber of connections per level: 3
Nominal cross section: 2.5 mm²
1st level connection left
Stripping length: 8 mm ... 10 mm
Internal cylindrical gage: A3
Connection in acc. with standard: IEC 61984
Conductor cross section rigid: 0.08 mm² ... 4 mm²
Cross section AWG: 28 ... 12 (converted acc. to IEC)
Conductor cross section flexible: 0.08 mm² ... 2.5 mm²
Conductor cross section, flexible [AWG]: 28 ... 14 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.14 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.14 mm² ... 2.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm²
Nominal current: 20 A
Maximum load current: 20 A (with 4mm² conductor cross section)
Nominal voltage: 400 V (voltage is determined by the plug used)
Nominal cross section: 2.5 mm²
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/ec280317492eaa4a87c2d9a00244f076/-S204x204-FJPG
Width: 5.2 mm
End cover width: 2.2 mm
Height: 81 mm
Depth on NS35/7,5: 36.5 mm
Depth on NS35/15: 44 mm
Material specificationsColor: gray
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60°C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)): 130°C
Relative insulation material temperature index (Elec., UL 746 B): 130°C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Calorimetric heat release NFPA 130 (ASTM E 1354): 28 MJ/kg
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Electrical testsSurge voltage test
Test voltage setpoint: 7.3 kV
Result: Test passed
Short-time withstand current 2.5 mm²: 0.3 kA
Power-frequency withstand voltage
Test voltage setpoint: 1.89 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsAttachment on the carrier
DIN rail/fixing support: NS35
Test force setpoint: 1 N
Result: Test passed
Environmental and real-life conditionsNeedle-flame test
Time of exposure: 30 s
Result: Test passed
Oscillation/broadband noise
Specification: DINEN50155 (VDE0115-200):2008-03
Spectrum: Service life test category1, classB, body mounted
Frequency: f1 = 5 Hz to f2 = 150 Hz
ASD level: 0.964 (m/s²)²/Hz
Acceleration: 0.58g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Specification: DINEN50155 (VDE0115-200):2008-03
Pulse shape: Half-sine
Acceleration: 5g
Shock duration: 30ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C)
Ambient temperature (assembly): -5°C ... 70°C
Ambient temperature (actuation): -5°C ... 70°C
Permissible humidity (storage/transport): 30 % ... 70 %
Standards and regulationsConnection in acc. with standard: IEC 61984
MountingMounting type: NS 35/7,5
NS35/15
Specifiche
ECLASSECLASS-11.0: 27141126
ECLASS-12.0: 27141126
ECLASS-13.0: 27250108
ETIMETIM 9.0: EC000902
UNSPSCUNSPSC 21.0: 39121400
Descrizione
Disconnect terminal block, nom. voltage: 400 V, nominal current: 20 A, connection method: Spring-cage/plug-in connection, cross section: 0.08 mm² - 4 mm², AWG: 28 - 12, length: 81 mm, width: 5.2 mm, color: gray, mounting: NS 35/7,5, NS 35/15
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00500.pdf

Approvals_00639.pdf

Approvals_00838.pdf

Approvals_01092.pdf

Data_sheet_04022.pdf

Manufacturer_declaration_04365.pdf

Manufacturer_declaration_04366.pdf

Safety_notes_00001.pdf

Technical_drawing_42924.pdf