Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

PHOENIX CONTACT 3046663
PHOENIX CONTACTDisponibile

UTTB 2,5-DIO/U-O - Component terminal block

Component terminal block, The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A., with integrated diode, nom. voltage: 500 V, nominal current: 0.5 A, connection method: Screw connection, 1st and 2nd level, Rated cross section: 2.5 mm2, cross section: 0.14 mm2 - 4 mm2, mounting type: NS 35/7,5, NS35/15, color: gray
Cod. Articolo: 3046663
Cod. Fornitore: 3046663
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Download
Caratteristiche Tecniche
NotesGeneral: The max. current is determined by the diode. Installed: Diode 1N 4007, reverse voltage: 1300 V, maximum continuous current: 0.5 A.
Product propertiesProduct type: Component terminal block
Number of connections: 4
Number of rows: 2
Potentials: 2
Insulation characteristics
Overvoltage category: III
Degree of pollution: 3
Electrical propertiesRated surge voltage: 6 kV
Maximum power dissipation for nominal condition: 0.77 W
Connection dataNumber of connections per level: 2
Nominal cross section: 2.5 mm²
1st and 2nd level
Screw thread: M3
Tightening torque: 0.5 ... 0.6 Nm
Stripping length: 9 mm
Internal cylindrical gage: A3
Conductor cross section rigid: 0.14 mm² ... 4 mm²
Cross section AWG: 26 ... 12 (converted acc. to IEC)
Conductor cross section flexible: 0.14 mm² ... 4 mm²
Conductor cross section, flexible [AWG]: 26 ... 12 (converted acc. to IEC)
Conductor cross-section flexible (ferrule without plastic sleeve): 0.14 mm² ... 2.5 mm²
Flexible conductor cross section (ferrule with plastic sleeve): 0.14 mm² ... 2.5 mm²
2 conductors with same cross section, solid: 0.14 mm² ... 1.5 mm²
2 conductors with same cross section, flexible: 0.14 mm² ... 1.5 mm²
2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.14 mm² ... 1.5 mm²
2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 1.5 mm²
Nominal current: 0.5 A
Maximum load current: 0.5 A
Nominal voltage: 500 V
Nominal cross section: 2.5 mm²
DimensionsWidth: 5.2 mm
End cover width: 2.2 mm
Height: 69.9 mm
Depth: 64.4 mm
Depth on NS35/7,5: 65 mm
Depth on NS35/15: 72.5 mm
Material specificationsColor: gray
Flammability rating according to UL 94: V0
Insulating material group: I
Insulating material: PA
Static insulating material application in cold: -60°C
Relative insulation material temperature index (Elec., UL 746 B): 130°C
Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3
Surface flammability NFPA 130 (ASTM E 162): passed
Specific optical density of smoke NFPA 130 (ASTM E 662): passed
Smoke gas toxicity NFPA 130 (SMP 800C): passed
Electrical testsSurge voltage test
Test voltage setpoint: 7.3 kV
Result: Test passed
Power-frequency withstand voltage
Test voltage setpoint: 1.89 kV
Result: Test passed
Mechanical propertiesMechanical data
Open side panel: Yes
Mechanical testsMechanical strength
Result: Test passed
Attachment on the carrier
Result: Test passed
Environmental and real-life conditionsOscillation/broadband noise
Specification: DINEN50155 (VDE0115-200):2022-06
Spectrum: Service life test category2, bogie-mounted
Frequency: f1 = 5 Hz to f2 = 250 Hz
ASD level: 6.12 (m/s²)²/Hz
Acceleration: 3.12g
Test duration per axis: 5 h
Test directions: X-, Y- and Z-axis
Result: Test passed
Shocks
Specification: DINEN50155 (VDE0115-200):2022-06
Pulse shape: Half-sine
Acceleration: 30g
Shock duration: 18ms
Number of shocks per direction: 3
Test directions: X-, Y- and Z-axis (pos. and neg.)
Result: Test passed
Ambient conditions
Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.)
Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C)
Ambient temperature (assembly): -5°C ... 70°C
Ambient temperature (actuation): -5°C ... 70°C
Permissible humidity (storage/transport): 30 % ... 70 %
MountingMounting type: NS 35/7,5
NS35/15
Specifiche
ECLASSECLASS-11.0: 27141127
ECLASS-12.0: 27141127
ECLASS-13.0: 27250114
ETIMETIM 9.0: EC000903
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Approvals_00806.pdf

Approvals_01096.pdf

Manufacturer_declaration_00398.pdf

Manufacturer_declaration_17358.pdf

Safety_notes_00001.pdf

Technical_drawing_43321.pdf