Non disponibile

CAN bus Extenders

Cod. Articolo: WRC-CANX-NEM-DN

Cod. Fornitore: WRC-CANX-NEM-DN

PROSOFT TECHNOLOGY

Caratteristiche Tecniche

Descrizione

Caratteristiche Tecniche

Key Features
Expands the usable applications for DeviceNet, J1939, SDS, and other CAN V2.0, Part A and Part B compatible CAN bus systems
Enables the creation of star, tree and other non-linear network topologies which increases flexibility in system design and reduces installation costs
Works with both trunk lines and drop lines
Allows operation at higher speeds for specific distances
Operates at 9.6K to 1M fixed baud for J1939 or CAN networks
Auto-detects baud rate on DeviceNet (125k, 250k, or 500k baud)
Isolates the two sections of the CAN bus (copper wire)
Extender operation is transparent to Master and Slave devices
Powered from the CAN bus network
Pluggable 5-pin DeviceNet connections (WRC-CANX-DIN-DN)
Sealed NEMA-4X enclosure (WRC-CANX-NEM-DN)
Standard round, mini-style connector with male pins for copper cable (WRC-CANX-NEM-DN)
Standard CAN chips manage CAN bus error detection and handle message bus arbitration
Less than 900 µsec latency
Termination resistor built in on the CAN bus interfaces
Series IV Enhancements include
Expanded DIP switch settings allow selection for CAN bus speeds up to 1M baud
Made enhancements to allow for adding Custom baud rates in the future

Descrizione

WRC CAN bus Extenders boost signal levels, allowing longer cable lengths, longer trunk lines, and longer drop lines without sacrificing network speed. CAN bus Extenders permit maximum network speed and throughput on CAN, J1939, or DeviceNet network devices, resulting in better control of the process. In addition extenders require no configuration when used in DeviceNet applications as they are configured for autobaud operation. Comes with the standard two-year Western Reserve Controls warranty