140M-C2N-A63 ROCKWELL AUTOMATION

Number of poles	3
With integrated under voltage release	No
Rated short-circuit breaking capacity lcu at 400 V, 50 Hz	100 kA
Complete device with protection unit	Yes
Rated permanent current Iu	0.63 A
Rated voltage	230 V
Type of control element	Turn button
Rated frequency	60 Hz
Magnetic release current per IEC	8.2 A
Rated operational current (Ie) per IEC	0.63 A
Rated supply current (Ie)	0.1 A
Ultimate short circuit breaking capacity (Icu) per IEC	100 kA @ 690V
Rated service short circuit breaking capacity (Ics) per IEC	100 kA @ 690V
Magnetic trip current	8.2 A
Hp rating, max	0.33 Hp @ 575V, 3-phase
Rated insulation voltage (Ui)	690V per IEC, SEV, VDE0660
KW rating, max	0.25 kW @ 690V (AC-3), 3-phase
Switching of standard motors per IEC	0.25 kW @ 690V (AC-3), 3-phase
Back up fuse (gG, gL) current rating (if Icc Ã¢¥ Icu ) per IEC	No back-up fuse required @ 690V
Short circuit current (Type 2 coordination), max	65 kA @ 480V
Short circuit current for group motor installation with 100-C contactor, max	65 kA @ 480V, UL 508Ã¢manual motor controller
Short circuit current for motor disconnect with 100-C contactor, max	65 kA @ 480V, UL 508Ã¢manual motor controller
Electrical life cycle	100000 operations (Ie maximum)
Rated thermal current (Ith)	0.1...32 A @ 60 °C ambient temperature
Fuse or circuit breaker per NEC, max	450 A, UL 508Ã¢manual motor controller with 100-C contactor
Rated impulse withstand voltage (Uimp)	Main circuits/overvoltage category: 6 kV/III
Short circuit current for group motor installation, max	65 kA @ 480V, UL 508Ã¢manual motor controller
Short circuit current for motor disconnect, max	65 kA @ 480V, UL 508Ã¢manual motor controller
Short circuit current for self-protected combination motor controller with 100-C contactor, max	65 kA @ 480Y/277V, UL-508Ã¢Type E self-protected combination motor controller
Magnetic release current (±20 %)	Fixed setting 13...14 x Ie max. Ie max. = maximum values of setting ranges
Protection type	Fixed magnetic only (13 x In)
Motor drive integrated	No
With switched-off indicator	No
Motor drive optional	Yes
Position of connection for main current circuit	Front side
Type of electrical connection of main circuit	Screw connection
Switching frequency, max	25 ops/h
Total power loss (Pv) for circuit breaker at rated load operating temperature	6 W
Ultimate interrupting current for group motor	65 kA @ 480V
Phase loss protection	Differential release
Suitable for DIN rail (top hat rail) mounting	No
DIN rail (top hat rail) mounting optional	Yes
Degree of protection (IP)	IP2X
Weight	315 lb
Mechanical life operations	100000 /h
Breaking capacity	Standard breaking capacity
Factory option	No circuit-breaker auxiliary or trip contacts
Vibration resistance	Operation (60068-2-6): 5 G
Shock resistance	Transport (60068-2-27): 30 G, 11 ms, all axes
Ambient storage temperature	-40 °C
Ambient operating temperature	-25 °C
Ambient temperature compensation	-20 °C
Site altitude	to 2000 m N.N. (6561 ft)
Dependence on temperature	No reduction @ 60 °C (140 °F)
Pollution degree	3
Moisture heat (60068-2-3)	40 °C, relative humidity 93 %, 56 days
Dry heat (60086-2-2)	100 °C, relative humidity < 50 %, 7 days
Moisture change climate (600068-2-30)	23 °C/83 % relative humidity and 40 °C/92 % relative humidity, 56 cycles
Frame size	Frame size C, 32 A
Contactor size (Type 2 coordination), min	100-C09 @ 600V
Contactor size, min	100-C09, UL-508Ã¢Type E self-protected combination motor controller
Device construction	Built-in device fixed built-in technique
Utilization category	Motor starter: AC-3 (IEC60947-4-1)