150-F1250NBE ROCKWELL AUTOMATION

With display	Yes
Voltage type for actuating	AC
Rated operating voltage Ue	200 V
Rated control supply voltage at AC 50 Hz	110 V
Rated control supply voltage at AC 60 Hz	110 V
Overload current for line connected devices	416 A
Overload current for delta connected devices	533 A
Controller type	Soft starter
Control options	None
Trip classes	10, 15, 20 and 30
Trip current rating	117% of motor FLC
Heatsink fan rating	150VA @ 110/120V AC or 220/240V AC
DV/DT protection	RC snubber network for power circuit
Repetitive peak inverse voltage rating	1400V per UL/CSA/NEMA for power circuit
Operating frequency	50/60 Hz for power circuit
Line connected motor power, max	900 kW @ 500V AC, 50 Hz, 3-phase
Delta connected motor power, max	900 kW @ 400/415V AC, 50 Hz, 3-phase
Rated impulse voltage	6000V per IEC for power circuit
Dielectric withstand	2500V per IEC for power circuit
Line connected motor current	416...1250 A @ 600/Y/690V AC, 3-phase
Delta connected motor current	533...1600 A @ 500/575V AC, 3-phase
Ampere tested european style, max	Two fuses in parallel 6,6URD33xxx1250 @ 690V for maximum FLC
Ampere tested north american style, max	Two fuses in parallel A070URD33xxx1250 @ 690V for maximum FLC
Transient protection	Metal oxide varistors: 220 Joules (optional) for power circuit
Insulation voltage	Rated 500V per IEC for power circuit
Rated operational voltage	200...480V AC (-15%, +10%) per UL/CSA/NEMA for power circuit
Input OFF-state current	<10 mA AC, <3 mA DC for control circuit @ input OFF-state voltage
Short-circuit protection device list	Standard fuse, circuit breaker and high capacity time delay class CC/J/L
Number of contacts	1 for auxiliary contacts
High capacity available fault current, max	85 kA @ 600V, maximum current 3000 A time delay Class J or Class L fuse for line connected motors
Type of current	AC for auxiliary contacts
Conventional thermal current (Ith)	AC/DC: 5 A for auxiliary contacts
Type of control circuit	Electromagnetic relay for auxiliary contacts
Type of contacts	Programmable NO/NC for auxiliary contacts
Utilization category	MG 1 per UL/CSA/NEMA for power circuit
Standard controller feature	Status indication: stopped, starting, stopping, at speed, alarm and fault
Standard available fault current, max	85 kA @ 690V for maximum FLC
Optional controller feature	SMB smart motor braking control: provides motor braking without additional equipment for applications that require the motor to stop quickly, braking current is adjustable from 0...400% of the motorÃ¢s full-load current rating
Integrated motor overload protection	Yes
Short circuit protection device performance (SCPD) type	Type 1
Number of sensors, max	6 for PTC input ratings
Voltage at PTC terminals (RPTC = open), max	30V for PTC input ratings
Voltage at PTC terminals (RPTC = 4 kÃ©), max	<7.5 for PTC input ratings
Transformer rating control module	751 VA (recommended 800 VA)
Response time	800 ms for PTC input ratings
Cold resistance of PTC sensor chain, max	1500 Ohm for PTC input ratings
Tachometer input	0...5V DC, 4.5V DC = 100% Speed
Short circuit trip resistance	25 Ohm ± 10 Ohm for PTC input ratings
Response resistance	3400 Ohm ± 150 Ohm for PTC input ratings
Reset resistance	1600 Ohm ± 100 Ohm for PTC input ratings
Input OFF-state voltage, max	50V AC, 10V DC/12V AC for control circuit
Input ON-state voltage, min	85V AC, 19.2V DC/20.4V AC for control circuit
Rated operational current	3 A @ 120V AC, 1.5 A @ 240V AC for auxiliary contacts
Input ON-state current	20 mA @ 120V AC/40mA @ 240V AC, 7.6 mA @ 24V AC/DC for control circuit
Contact type	auxiliary contacts 19/20 (Aux #1), 29/30 (Aux #2), 31/32 (Aux #3) and 33/34 (Aux #4)
Steady state heat dissipation with control and fan power	1222 W
Storage and transportation temperature	-20 °C
Humidity	5...95% (noncondensing)
Operating temperature	Open: -5 to 50 °C (23 to 122 °F)
Protection against electrical shock	IP00 (open device) per IEC for power circuit
EMC emission levels	Radiated emission: Class A
EMC immunity levels	Surge transient: per EN/IEC 60947-4-2
Altitude	2000 m
Pollution degree	2
Weight	224 kg
Shock	Operational: 4 G
Width	596.9 mm (23.50 inch)
Depth	346.2 mm (13.63 inch)
Height	1041.1 mm (41 inch)
Power pole construction	Heatsink hockey puck thyristor modular design
Vibration	Operational: 1.0 G peak, 0.15 mm (0.006 inch) displacement
Make	3600VA for auxiliary contacts
Break	360VA for auxiliary contacts
Internal bypass	Yes
Function	Single direction
Power terminal markings	NEMA, CENELEC EN50 012
Control terminals	Clamping yoke connection, M3 screw clamp
Line/load side power terminals	Two 13.5 mm (0.53 inch) diameter holes per power pole
Number of poles	3
Enclosure	Open type
Control modules construction	Thermoset and thermoplastic moldings
Metal parts construction	Plated brass, copper or painted steel