Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 1769-AENTR
ROCKWELL AUTOMATION 1769-AENTR
ROCKWELL AUTOMATION 1769-AENTR
ROCKWELL AUTOMATIONDisponibile

1769 Ethernet/IP Adapter

1769 Network Adaptor,Ethernet,69-I/O,24.0V DC, Dual Port
Cod. Articolo: 1769-AENTR
Cod. Fornitore: 1769-AENTR
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Number of HW-interfaces industrial Ethernet2
Suitable for safety functionsNo
With optical interfaceNo
Supporting protocol for TCP/IPYes
Supporting protocol for DeviceNetNo
Supporting protocol for other bus systemsNo
RedundancyNo
IO link masterNo
Supporting protocol for DeviceNet SafetyNo
Supporting protocol for EtherNet/IPYes
Type of data transmissionOther
TCP/IP communication connections96
Logix communication connections128
Enclosure type ratingNone (open-style)
Current draw500 mA @ 5.2V DC
Ports2 Ethernet RJ45 Category 5
Wire category1 - on communication ports
Wire sizeEthernet connections: RJ45 connector according to IEC 60603-7, 2 or 4 pair Category 5e minimum cable according to TIA 568-B.1 or Category 5 cable according to ISO/IEC 24702.
Isolation voltage50V (continuous), basic insulation type, Tested at 710V DC for 60 s
Supporting protocol for LONNo
Supporting protocol for ASINo
Supporting protocol for PROFIBUSNo
Supporting protocol for CANNo
Supporting protocol for INTERBUSNo
Supporting protocol for KNXNo
Supporting protocol for ModbusNo
Supporting protocol for Data-HighwayNo
Supporting protocol for SUCONETNo
With potential separationNo
Supporting protocol for SERCOSNo
Supporting protocol for INTERBUS-SafetyNo
Radio standard BluetoothNo
Radio standard Wi-Fi 802.11No
Supporting protocol for AS-Interface Safety at WorkNo
Supporting protocol for Foundation FieldbusNo
Supporting protocol for PROFINET CBANo
Supporting protocol for PROFINET IONo
Supporting protocol for PROFIsafeNo
Supporting protocol for SafetyBUS pNo
Radio standard GPRSNo
Radio standard GSMNo
Radio standard UMTSNo
Slot width1
EtherNet/IP communication rate10/100 Mbps
Width50 mm
Height118 mm
Depth87 mm
Weight, approx0.28 kg
Module locationDIN rail or panel mount
Mounting screw torque1.16 Nm (10 lb.in) - use M4 or #8 screws
Surrounding air temperature, max60 °C
EmissionsCISPR 11 (IEC 61000-6-4): Class A
Vibration2 G @ 10...500 Hz
ESD immunity6 kV contact discharges, 8 kV air discharges
EFT/B immunity±3 kV at 5 kHz on communications ports
Relative humidity5...95% noncondensing
ShockOperating: 15 G
Conducted RF immunity10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
Surge transient immunity±2 kV line-earth (CM) on communication ports
Nonoperating temperature-40 to 85 °C
Operating temperature0 to 60 °C
Radiated RF immunity10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% Pulse 100% AM at 900 MHz, 10V/m with 200 Hz 50% Pulse 100% AM at 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
North American temperature codeT3C