Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 194E-KA80
ROCKWELL AUTOMATION 194E-KA80
ROCKWELL AUTOMATIONNon disponibile

194E Load switch

IEC Load Switch, NEMA Type 3/4/4X - IP66 Non-Metallic - Base / DIN Rail, Handle Color:Grey / Black, 80A, 3 Poles
Cod. Articolo: 194E-KA80
Cod. Fornitore: 194E-KA80
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Caratteristiche Tecniche
Number of poles3
Conditioned rated short-circuit current Iq30 kA
Rated permanent current Iu80 A
Rated operation power at AC-23, 400 V37 kW
Max. rated operation voltage Ue AC600 V
Rated operation power at AC-3, 400 V30 kW
Rated short-time withstand current lcw2500 kA
Type of control elementDoor coupling rotary drive
Rated frequency60 Hz
Switch size80 A
Lost power per pole3.6 W
Conventional free air thermal current (Ith)100 A per IEC
Conventional enclosed thermal current (Ie)80 A per IEC
Rated operational voltage (Ue)690V per IEC
Rated isolation voltage (Ui)690V per IEC
Continuous currentUL/CSA (applications): 80 A
Rated breaking capacityAC-23A (cosÆ 0.45): 800 A @ 400V
Motor FLA ratingUL/CSA application: 68 A @ 240V, 60 Hz, 3 pole, 3 phase
Hp motor ratingUL/CSA application: 50 Hp @ 600V, 60 Hz, 3 pole, 3 phase
Fuse rating of circuit (type g, G), maxShort circuit current (co-ordination type 2): 80 A @ 400/415V
Rated current (Ie)DC-21A (for resistive loads): 80 A @ 96V, 2 pole in series, T ≤1 ms, Ue max = 660V
Rated power (Pe)AC-3: 30 kW @ 690V
Number of switches1
Motor drive integratedNo
Motor drive optionalNo
Voltage release optionalNo
Type of electrical connection of main circuitScrew connection
Switching rate120 ops/h
Rated impulse voltage (Uimp)8 kV per UL, CSA
Test voltage (Ui)2.5 kV for 1 minute
InterlockableNo
Version as emergency stop installationYes
Degree of protection (NEMA)4X
Degree of protection (IP)IP66
Material housingPlastic
Tightening torque5.6 Nm (50 lb-in)
Enclosure sizeStandard size enclosure
Rigid wire gauge4...50 mm2 (10...1 AWG)
Fine strands wire gauge4...35 mm2 (10...1 AWG)
Wire gauge, maxTerminal size per IEC 947-1: A9
Left side mountingNo modification
Right side mountingNo modification
Protection class according to IEC 529Switch bodies: IP20 @ motor rating 60 Hz
Version as safety switchNo
Version as reversing switchNo
Version as main switchYes
Version as maintenance-/service switchYes
With transparent coverNo
Mechanical life operations200000
ModelSurface mounting
Suitable for front mounting 4-holeNo
Suitable for front mounting centreNo
Colour control elementBlack
Device constructionComplete device in housing
Actuator colourGrey/black
Enclosed switch height, approxOversized enclosure: 199.9 mm (7.87 inch) @ 63 A
Enclosed switch depth, approxOversized enclosure: 237.24 mm (9.34 inch) @ 63 A
Enclosed switch width, approxOversized enclosure: 299.97 mm (11.81 inch) @ 63 A
InstallationNEMA 3/4/4X-IP66 non-metallic-base/DIN rail, 6 x 4 x 5
Suitable for floor mountingNo
Suitable for distribution board installationNo
Suitable for intermediate mountingNo
Ambient enclosed temperature-20 °C
Ambient storage temperature-40 °C
Ambient operation temperature-25 °C
Specifiche
Switch Data
Size:80 A
Enclosure Type:NEMA Type 3/4/4X - IP66 Non-Metallic (Rectangular)
Installation:Base / DIN Rail
Pole Configuration:3 Poles
Enclosure Size:Standard Size Enclosure
Configuration:OFF-ON 90°
Actuator Data
Handle Color:Grey / Black
Enclosed Switch Modifications
Left Side Modifications:No Modification
Right Side Modifications:No Modification
Descrizione
194E Load switch, 80 A, OFF-ON 90°, 3 Normally Open Power Poles, NEMA 3/4/4X-IP66 NonMtl(Rect), Base/DIN Rail, Standard Size Enclosure, Actuator: Black or None, Left: No Modification, Right: No Modification