Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 194E-Y100-1753-6A
ROCKWELL AUTOMATION 194E-Y100-1753-6A
ROCKWELL AUTOMATIONNon disponibile

IEC Load Switch, IP65 (Thermoplastic) - Base / DIN Rail, OFF-ON 90, 100A, 3 Poles, Supplied with a Type A Black/Grey Actuator

IEC Load Switch, IP65 (Thermoplastic) - Base / DIN Rail, OFF-ON 90°, 100A, 3 Poles, Supplied with a Type A Black/Grey Actuator
Cod. Articolo: 194E-Y100-1753-6A
Cod. Fornitore: 194E-Y100-1753-6A
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Caratteristiche Tecniche
Number of auxiliary contacts as normally open contact0
Number of auxiliary contacts as normally closed contact0
Conditioned rated short-circuit current Iq25 kA
Rated permanent current Iu100 A
Rated operation power at AC-23, 400 V55 kW
Max. rated operation voltage Ue AC690 V
Rated operation power at AC-3, 400 V37 kW
Rated short-time withstand current lcw2500 kA
Type of control elementLong turning handle
Rated frequency60 Hz
Switch size100 A
Lost power per pole5.5 W
Conventional free air thermal current (Ith)120 A per IEC
Conventional enclosed thermal current (Ie)100 A per IEC
Rated operational voltage (Ue)690V per IEC
Rated isolation voltage (Ui)690V per IEC
Continuous currentUL/CSA (applications): 100 A
Rated breaking capacityAC-23A (cosφ 0.45): 800 A @ 400V
Motor FLA ratingUL/CSA application: 84 A @ 120V, 60 Hz, 3 pole, 3 phase
Hp motor ratingUL/CSA application: 7.5 Hp @ 120V, 60 Hz, 1 pole, 1 phase
Fuse rating of circuit (type g, G), maxShort circuit current (co-ordination type 2): 100 A @ 400/415V
Rated current (Ie)DC-21A (for resistive loads): 80 A @ 110V, 2 pole in series, T ≤1 ms, Ue max = 660V
Rated power (Pe)AC-3: 22 kW @ 690V
Number of switches1
Motor drive integratedNo
Voltage release optionalNo
Type of electrical connection of main circuitScrew connection
Switching rate120 ops/h
Rated impulse voltage (Uimp)8 kV per UL, CSA
Test voltage (Ui)2.5 kV for 1 minute
InterlockableNo
Version as emergency stop installationNo
Degree of protection (NEMA)4X
Tightening torque5.6 Nm (50 lb-in)
Switch configurationOFF-ON 90°
Rigid wire gauge4...50 mm2 (10...1 AWG)
Fine strands wire gauge4...35 mm2 (10...1 AWG)
KnockoutsPG-type cable gland entry
Wire gauge, maxTerminal size per IEC 947-1: A9
Protection class according to IEC 529Switch bodies: IP20 @ motor rating 60 Hz
Actuator typeSupplied with a type A black/grey actuator
Version as reversing switchNo
Version as main switchYes
Version as maintenance-/service switchYes
Degree of protection (IP), front sideIP20
Mechanical life operations200000
Colour control elementBlack
Device constructionComplete device in housing
Enclosures height, approx230 mm (9-1/16 inch) @ 100 A
Enclosures width, approx175 mm (6-57/64 inch) @ 100 A
Enclosures depth, approx120 mm (4-47/64 inch) @ 100 A
InstallationIP65 (thermoplastic)-base/DIN rail
Suitable for distribution board installationNo
Ambient enclosed temperature-20 °C
Ambient storage temperature-40 °C
Ambient operation temperature-25 °C
Specifiche
Switch Data
Size:100 A
Enclosure Type:IP65 (Thermoplastic)
Installation:Base / DIN Rail
Pole Configuration:3 Poles
Configuration:OFF-ON 90
Knockouts:PG Type Cable Gland Entry
Actuator Data
Actuator Selection:Supplied with a Type A Black/Grey Actuator