Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 194L-A32-1754
ROCKWELL AUTOMATION 194L-A32-1754
ROCKWELL AUTOMATION 194L-A32-1754
ROCKWELL AUTOMATIONDisponibile

194L Load Switch, 32 A, 4 Poles, OFF-ON 90°, Open, Base/DIN Rail, Select actuator separately

IEC Control and Load Switch, OFF-ON 90°, 32 Amp, 4 Poles , Base / DIN Rail
Cod. Articolo: 194L-A32-1754
Cod. Fornitore: 194L-A32-1754
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Number of poles4
Rated permanent current Iu32 A
ModelOn/Off switch
Rated impulse voltage (Uimp)8 kV
Switch size32 A
Power lost0.8 W
Rated voltage (Ue)690V per IEC-947
Rated thermal current (Ith)32 A @ 40 °C per IEC-947
Rated thermal current (Ithe)32 A @ 60 °C per IEC-947
Conditional rated short circuit current5 kA (gL characteristic)
Rated breaking capacity296 A @ 220V, 0.45 [cos j]
Rated short-time current0.8 kArms for 1 s (gL characteristic)
Strongest series fuse35 A (not in enclosure, gL characteristic)
Standard motor DOL rating3-poles, 3-phase: 30.4 A @ 120V (similar to AC-3) per UL (CSA)
Rated making/breaking capacity (= 4 x Ie)2 contacts in series: 66.6 A @ 63V (DC-23A, DC-3, DC-5 for inductive loads, T ≤7.5 ms)
Rated making/breaking capacity (= 1.5 x Ie)8 contacts in series: 48 A @ 504V (1.05 x rated voltage), DC-21A (for resistive loads, T = 1 ms), Ue max = 600V
Ampere rating32 A (suitable for switching off-load (AC-20) above 660V, but only upto 660V for switches with screws at the rear)
Rated making/breaking capacity (= 1.1 x Ie)8 contacts in series: 8.8 A @ 369.6V (1.1 x rated voltage), DC-21A (for inductive loads, T = 50 ms), Ue max = 600V
Rated power (Pe)3-poles, 3-phase: 7.5 Hp @ 240V per UL (CSA)
Rated current (Ie)8 contacts in series: 8 A @ 384V, DC-21A (for inductive loads, T = 50 ms)
Type of electrical connection of main circuitScrew connection
Electrical switch rate120 ops/h
Electrical switching rate120 ops/h per UL/CSA
With zero (off) positionYes
Protection classSwitch bodies: IP20 (IEC 529)
Gland entry typePG-type cable gland entry
Rigid wire gauge, max(2) 12...8 AWG (4...10 mm^2)
Fine strands wire gauge, max(2) 14...10 AWG (2.5...6 mm^2)
Actuator typeSelect actuator separately
Switch configurationOFF-ON 90°
With retraction in 0-positionNo
Suitable for distribution board installationNo
Suitable for intermediate mountingNo
Complete device in housingNo
Degree of protection (IP), front sideIP66
Mechanical switching rate1200 ops/h
Mechanical life operationsEndurance: 1000000
InstallationOpen-base/DIN rail
Suitable for floor mountingYes
Material housingPlastic
Operating temperature-25 °C
Storage temperature-40 °C