Non disponibile 
| Suitable for safety functions | No |
| With optical interface | No |
| Supporting protocol for TCP/IP | No |
| Supporting protocol for DeviceNet | Yes |
| Supporting protocol for other bus systems | No |
| Redundancy | No |
| IO link master | No |
| Supporting protocol for DeviceNet Safety | No |
| Supporting protocol for EtherNet/IP | No |
| Power dissipation, max | 1.44 W |
| Data transmission type | DeviceNet |
| Enclosure type rating | Meets IP20 |
| Number of nodes, max | 20 nodes for I/O operation |
| Wire category | 1 - on power ports |
| Wire size | 0.25...2.5 mm2 (24...14 AWG) solid copper wire, 0.25...2.5 mm2 (24...14 AWG) stranded copper wire, Rated @ 75 ðC (167 ðF ), or greater, 1.2 mm (3/64 in.) insulation maximum |
| Isolation voltage | 50V (continuous), Type tested for 60 s @ 500V AC |
| Supporting protocol for LON | No |
| Supporting protocol for ASI | No |
| Supporting protocol for PROFIBUS | No |
| Supporting protocol for CAN | No |
| Supporting protocol for INTERBUS | No |
| Supporting protocol for KNX | No |
| Supporting protocol for Modbus | No |
| Supporting protocol for Data-Highway | No |
| Supporting protocol for SUCONET | No |
| With potential separation | No |
| Supporting protocol for SERCOS | No |
| Supporting protocol for INTERBUS-Safety | No |
| Supporting protocol for AS-Interface Safety at Work | No |
| Supporting protocol for Foundation Fieldbus | No |
| Supporting protocol for PROFINET CBA | No |
| Supporting protocol for PROFINET IO | No |
| Supporting protocol for PROFIsafe | No |
| Supporting protocol for SafetyBUS p | No |
| SIL according to IEC 61508 | None |
| Preferred power supply | 1606-XLSDNET4 |
| Backplane power consumption | 50 mA @ 24V DC |
| DeviceNet current | 24V DC, 300 mA Class 2 |
| Network protocol | I/O Slave messaging: poll command |
| DeviceNet status indicators | Module status - red/green Network status - red/green |
| DeviceNet communication rate, max | 125 Kbps - 420 m (1378 ft.), 250 Kbps - 200 m (656 ft.), 500 Kbps - 75 m (246 ft.) |
| Width | 31.5 mm |
| Height | 62 mm |
| Depth | 20 mm |
| Weight | 35 g |
| Surrounding air temperature, max | 65 ðC |
| Emissions | CISPR 11 (IEC 61000-6-4): Class A |
| Vibration | IEC 60068-2-6 (Test Fc, operating), 2 G @ 10...500 Hz |
| ESD immunity | IEC 61000-4-2: 6 kV contact discharges, 8 kV air discharges |
| EFT/B immunity | IEC 61000-4-4: ñ 2 kV @ 5 kHz on communication ports |
| Relative humidity | IEC 60068-2-30 (Test Db, unpackaged damp heat), 5...95% noncondensing |
| Shock | Operating: 25 G, IEC 60068-2-27 (Test Ea, unpackaged shock) |
| Conducted RF immunity | IEC 61000-4-6, 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz |
| Surge transient immunity | IEC 61000-4-5: ñ 2 kV line-earth(CM) on communication ports |
| Nonoperating temperature | -40...85 ðC (-40...185 ðF), IEC60068-2-1 (Test Ad, operating cold), IEC60068-2-2 (Test Bd, operating dry heat), IEC 60068-2-14 (Test Nb, operating thermal shock) |
| Operating temperature | -20...65 ðC (-4...149 ðF), IEC 60068-2-1 (Test Ad, operating cold), IEC 60068-2-2 (Test Bd, operating dry heat), IEC 60068-2-14 (Test Nb, operating thermal shock) |
| Radiated RF immunity | IEC 61000-4-3: 10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz, |
| North American temperature code | T4 |
| Explosion safety category for gas | None |
| Explosion safety category for dust | None |
Di seguito alcuni articoli correlati a quello che stai vedendo
