2080-IF4 ROCKWELL AUTOMATION

Number of analogue inputs	4
Resolution of the analogue inputs	12 Bit
Input, current	Yes
Input, voltage	Yes
Input, resistor	No
Input, resistance thermometer	No
Input, thermocouple	No
Input signal, configurable	No
Output, current	No
Output, voltage	No
Output signal configurable	No
Analogue inputs configurable	Yes
Analogue outputs configurable	No
Type of electric connection	Screw connection
Data range	0 to 65535
Channel to channel isolation	Non-isolation
Update time	180 ms per enabled channel
Input group to bus isolation	No isolation
Module error	Voltage: ±1.5% @ over full temperature range, -20...65°C (-4...149°F), Current: ±2.0% @ over full temperature range, -20...65°C (-4...149°F)
Wire size	Solid: 0.14 mm2 (26 AWG)...1.5 mm2 (16 AWG) @ Rated @ 90 °C (194 °F) insulation maximum, Stranded: 0.14 mm2 (26 AWG)...1.0 mm2 (18 AWG) @ Rated @ 90 °C (194 °F) insulation maximum
Suitable for safety functions	No
SIL according to IEC 61508	None
Recommended maximum shielded cable length	10 m
Voltage ranges	0 V
Current range	0 mA
Field input calibration	Not required
Overall accuracy	Voltage terminal: ±1% full scale @ 25°C, Current terminal: ±1% full scale @ 25°C
Surrounding air temperature, max	65 °C
North American temperature code	T4
Power consumption	<60 mA @ 3.3V
Emissions	CISPR 11 (IEC 61000-6-4): Class A
ESD immunity	IEC 61000-4-2: 6 kV contact discharges, 8 kV air discharges
EFT/B immunity	IEC 61000-4-4: ±2 kV @ 5 kHz on shielded ports
Relative humidity	IEC 60068-2-30 (Test Db, unpackaged damp heat), 5...95% noncondensing
Conducted RF immunity	IEC 61000-4-6, 10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
Surge transient immunity	IEC 61000-4-5: ±2 kV line-earth(CM) on shielded ports
Operating temperature	-20...65 °C (-4...149 °F): IEC 60068-2-1 (Test Ad, Operating Cold), IEC 60068-2-2 (Test Bd, operating dry heat), IEC 60068-2-14 (Test Nb, operating thermal shock)
Radiated RF immunity	IEC 61000-4-3: 10V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 900 MHz, 10V/m with 200 Hz 50% pulse 100% AM @ 1890 MHz, 10V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz,
Operating altitude	2000 m
Nonoperating temperature	-40...85 °C (-40...185 °F), IEC 60068-2-1 (Test Ab, Unpackaged Nonoperating Cold), IEC 60068-2-2 (Test Bb, Unpackaged Nonoperating Dry Heat), IEC 60068-2-14 (Test Na, Unpackaged Nonoperating Thermal Shock)
Non-linearity	±0.1% @ in percent full scale
Repeatability	±0.1%
Vibration	IEC 60068-2-6 (Test Fc, operating), 2 G @ 10...500 Hz
Shock	IEC 60068-2-27 (Test Ea, unpackaged shock): DIN rail mount: 25 g, nonoperating, Panel Mount: 35 g nonoperating
Mounting torque	0.2 Nm
Terminal screw torque	0.22...0.25 Nm (1.95...2.21 lb-in) (using a 2.5 mm (0.10 in.) flat-blade screwdriver)
Input impedance	>100 kÃ© for voltage mode, 250 Ã© for current mode
Explosion safety category for gas	None
Explosion safety category for dust	None