Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 440P-CMHS11E
ROCKWELL AUTOMATION 440P-CMHS11E
ROCKWELL AUTOMATIONNon disponibile

Safety Limit Switches, Small Plastic IEC, Full Sw Head & Body, Short Metal Roller Lever, 2 Circuits, Conduit Entry, Snap Acting, 1 Normall y Open Contact, 1 Normally Closed Contact, Standard Contacts, -25C Low Temp Limit, 65C High Temp Limit, Spring Ret

Safety Limit Switch, 22mm Plastic, Short Lever Metal Roller, 1 N.C., 1 N.O., Snap Acting, 1/2 inch NPT Conduit
Cod. Articolo: 440P-CMHS11E
Cod. Fornitore: 440P-CMHS11E
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Caratteristiche Tecniche
Number of contacts as normally closed contact1
Number of contacts as normally open contact1
With status indicationNo
Type of electric connectionOther
Utilization categoryQ600/DC-13
Switching current, min25 mA @ 5V DC
Auxiliary contacts1NO (with 2 NC)
Contact current rating (Ie)6 A @ 120V AC (Ue)
Thermal current (Ith)10 A
Actuation speed, min100 mm/min
Actuation speed, max250 mm/s
Actuation frequency, max6000 ops/hr
Rated insulation voltage600V AC
Suitable for safety functionsYes
Forced openingYes
Degree of protection (NEMA)1
Material housingPlastic
Degree of protection (IP)IP66
Contact typeSnap acting
Enclosure colorRed
Mounting2 x M4, any position
Body style22 mm small plastic body
Actuator typeShort metal roller lever
Mechanical life operations10000000 operations with no electrical load
Housing materialUL approved glass-filled polybutylene terephthalate
Connection type1/2 inch NPT conduit
Construction type housingCuboid
Operating temperature-25 °C
Safety contacts1 NC snap acting, 2 NC, 3 NC or 4 NC slow acting
Pollution degree3
ShockIEC 60068-2-7 (30 Gn 3 pulses per axis)
VibrationIEC 60068-2-6 (10...55 Hz, 0.35 mm amplitude)
Actuator materialVarious polymers and metals
Specifiche
Operator Type Selection
Body Style:22mm Small Plastic Body
Operator Type:Short Lever Metal Roller
Position Switch Data
Contacts (Safety/Auxiliary):1 N.C., 1 N.O.
Contact Type:Snap Acting
Connection Type:1/2 inch NPT Conduit
Descrizione
Safety Limit Switches, Small Plastic IEC, Full Sw Head & Body, Short Metal Roller Lever, 2 Circuits, Conduit Entry, Snap Acting, 1 Normally Open Contact, 1 Normally Closed Contact, Standard Contacts, -25C Low Temp Limit, 65C High Temp Limit, Spring Return, 1/2" NPT Thread, 22mm Small IEC Style Mounting