5069-IY4 ROCKWELL AUTOMATION

Number of analogue inputs	4
Input, current	Yes
Input, voltage	Yes
Input, resistor	Yes
Input, resistance thermometer	Yes
Input, thermocouple	Yes
Output, current	No
Output, voltage	No
Analogue inputs configurable	Yes
Analogue outputs configurable	No
Type of electric connection	Screw-/spring clamp connection
Local CJC sensor accuracy	±0.3 °C
Input range, current	0...20 mA, 4....20 mA
Remote CJC sensor accuracy	Based on specified thermistor: ±0.3 °C
RTD excitation current	600 Ã¼A, 3 wire mode, 100 Ã¼A, 2 wire mode
Module keying	Electronic keying via programming software
Scan time	Per channel: 625 Ã¼s, Per group: 2.5 ms
Step response time to 63% of value	7.5 ms (Notch filter 10 kHz)
Module conversion method	Sigma-Delta, One 24-bit multiplexed ADC
RTB torque	5069-RTB18-SCREW, 5069-RTB14CJC-SCREW: 0.4 Nm (3.5 lbin)
Overvoltage protection, max	Voltage, current, RTD, and thermocouple/mV modes: ±30V DC
Common mode voltage	±10V (Current mode and 3-wire RTD mode), ±2V (Voltage mode)
Data format	IEEE 32-bit floating point
Wire category	2 - shielded input ports, 2 - power ports, 1 wire per terminal for each signal port
Power dissipation, max	Voltage mode: 1.8 W, Current mode: 2.1 W, RTD mode: 2.1 W, Thermocouple / millivolt mode: 1.8 W
Indicators	1 green/red module status indicator, 4 yellow/red I/O status indicators, 2 yellow/red CJC status indicators
Thermal dissipation, max	Voltage mode: 6.1 BTU/hr, Current mode: 7.2 BTU/hr, RTD mode: 7.2 BTU/hr, Thermocouple/millivolt: 6.1 BTU/hr
Accuracy drift with temperature	Voltage: 0.200% full scale, Current: 0.300% full scale, RTD: 0.200% full scale, Thermocouple/millivolt: 0.200% full scale
Input Total Unadjusted Error (TUE)	Voltage: 0.300% full Scale, Current: 0.400% full Scale, RTD: 0.300% full Scale, Thermocouple/millivolt: 0.300% full Scale
Inputs	4 differential
Wire size	5069-RTB18-SPRING and 5069-RTB14CJCSPRING connections: 0.5...1.5 mm² (22...16 AWG) solid or stranded shielded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.), max diameter including insulation, single wire connection only, 5069-RTB18-S
Calibrated accuracy	Voltage: 0.100% full scale @ 25 °C Current: 0.100% full scale @ 25 °C RTD: 0.100% full scale @ 25 °C Thermocouple/millivolt: 0.100% full scale @ 25 °C
Suitable for safety functions	No
Notch filter frequency at RPI of 2.5 ms, min	10 kHz
Input anti-aliasing filter cutoff frequency, typical	500 Hz
Onboard data alarming	Yes
Scaling to engineering units	Yes
Real-time channel sampling	Yes
Thermocouple linearization	ITS-90
Input range, thermocouple / millivolt	±100 mV
Common mode noise rejection ratio	130 dB @ 50/60 Hz
Overcurrent protection, max	Current mode: ±30 mA
Input range, voltage	±10V, 0...10V, 0...5V
Notch filter at minimum RPI	62.5 kHz (0.2 ms, 1 channel enabled)
Input type, thermocouple	B, C, D, E, J, K, L (TXK/XK), N, R, S, T
Normal mode noise rejection ratio	65 dB @ 50/60 Hz, notch filter dependent
Input digital filter	First order lag, 0 msÃ¢¦32,767 ms (32.767 s)
Input range, resistive	1...500 Ã©, 2...1000 Ã©, 4...2000 Ã©, 8...4000 Ã©
Calibration methods	Factory calibrated, User-performed (optional)
Data value during overload condition	Full scale, overrange flag, Data uncertain / data bad
Resolution, thermocouple / millivolt	16 bits at 10 Hz notch filter: <3.1 Ã¼V/cnt in ±100 mV mode
Wire impedance	25 Ã© maximum for specified accuracy (3-wire RTD mode only)
HART handheld compliance	Add an external 250 Ã© resistor into the current loop for HART transmitter compliance
Insulation stripping length	5069-RTB18-SPRING connections: 10 mm (0.39 in.), 5069-RTB18-SCREW connections: 12 mm (0.47 in.)
Resolution, current	16 bits at 10 Hz notch filter: 0...21 mA: <0.32 Ã¼A/count (16 bits), 3.6...21 mA: <0.27 Ã¼A/count (16 bits)
Input notch filter (Hz) selections	5, 10 (50/60 default), 15, 20, 50, 60, 100, 200, 500, 1000, 2500, 5000, 10000, 15625, 25000, 31250, 62500
Open circuit detection time, nom	Voltage: + full scale, <2 s, Current: 4...20 mA range, <2 s, RTD: <2 s, Thermocouple / millivolt: + full scale, <10 s
Input type, RTD	100, 200, 500, 1000 Ã© platinum, alpha=385, 100, 200, 500, 1000 Ã© platinum, alpha=3916, 120 Ã© nickel, alpha=672, 100, 120, 200, 500 Ã© nickel, alpha=618, 10 Ã© copper 427
Resolution, voltage	16 bits at 10 Hz notch filter: ±10.5V: <320 Ã¼V/count (15 bits plus sign bipolar), 0...10.5V: <160 Ã¼V/count (16 bits unipolar), 0...5.25V: <80 Ã¼/V count (16 bits unipolar)
Resolution, RTD	(16 bits at 10 Hz notch filter) 3 wire mode: <7.9 mÃ©/cnt in 1...500 Ã© mode, <15.8 mÃ©/cnt in 2...1000 Ã© mode, <31.7 mÃ©/cnt in 4...2000 Ã© mode, <63.4 mÃ©/cnt in 8...4000 Ã© mode
CJC inputs	Two CJC sensors, 2 thermistors embedded in 5069-RTB14CJC-(screw or spring) RTB, -or- 2 thermistors wired to 5069-RTB18-(screw or spring) RTB, Thermistor type: Measurement specialties, Inc. 10K3A1A, (for thermocouple mode use only)
RTD sensor types/temperature range	100, 200, 500, 1000 ohm PT 385: -200...870 °C, -328...1598 °F, 73...1143 °K, 132...2058 °R, 100, 200, 500, 1000 ohm PT 3916: -200...630 °C, -328...1166 °F, 73...903 °K, 132...1626 °R, 10 ohm CU 247: -200...260 °C, -328...500 °F, 73...533 °K, 132...960 °R,
Thermocouple type/temperature range	Thermocouple Type B: 21Ã¢¦1820 °C, 68Ã¢¦3308 °F, 293Ã¢¦2093 °K, 528Ã¢¦3768 °R, Thermocouple Type C: 0Ã¢¦2320 °C, 32Ã¢¦4208 °F, 273Ã¢¦2593 °K, 492Ã¢¦4668 °R, Thermocouple Type D: 0Ã¢¦2320 °C, 32Ã¢¦4208 °F, 273Ã¢¦2593 °K, 492Ã¢¦4668 °R, Thermocouple Type E: -270Ã¢¦1000 °C, -454Ã¢¦18
Width	22 mm
Height	144.57 mm
Depth	105.42 mm
Enclosure type	None (open-style)
Surrounding air temperature, max	60 °C
North American temperature code	T4
Operating temperature	0 °C
Emissions	IEC 61000-6-4
ESD immunity	6 kV contact discharges, 8 kV air discharges
EFT/B immunity	±4 kV @ 5 kHz on power ports, ±3 kV @ 5 kHz on shielded input ports
Relative humidity	5...95% noncondensing
Conducted RF immunity	10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
Surge transient immunity	±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±2 kV line-earth (CM) on shielded input ports
Radiated RF immunity	10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
Nonoperating temperature	-40 °C
Voltage variation	10 ms interruption on MOD power port
SA power	100 mA @ 18...32V DC
SA power passthrough, max	9.95 A @ 18...32V DC
MOD power	75 mA @ 18...32V DC
MOD power passthrough, max	9.55 A @ 18...32V DC
RTB keying	None
Weight	175 g
Vibration	5 G @ 10...500 Hz
Shock	Operating: 30 G, Non operating: 50 G
Slot width	1
DIN rail	Compatible zinc-plated chromate-passivated steel DIN rail, You can use the EN50022 - 35 x 7.5 mm (1.38 x 0.30 in) DIN rail
Input impedance	Voltage: >1 MÃ©, Current: 90 Ã© typical, 70Ã¢¦110 Ã© range, RTD: >1 MÃ©, Thermocouple/millivolt: >1 MÃ©
Isolation voltage	250V (continuous), basic insulation type, 50V Functional isolation between SA power and input ports, No isolation between individual input ports
ATEX temp code	T4
IECEx temp code	T4