5069-OF4 ROCKWELL AUTOMATION

Number of analogue outputs	4
Input, current	No
Input, voltage	No
Input, resistor	No
Input, resistance thermometer	No
Input, thermocouple	No
Output, current	Yes
Output, voltage	Yes
Analogue inputs configurable	No
Analogue outputs configurable	Yes
Type of electric connection	Screw-/spring clamp connection
Capacitive load, max	1 Ã¼F (voltage mode only)
Inductive load, max	1 mH (current mode only)
Module keying	Electronic keying via programming software
Scan time	Per group 0...3: 1 ms
Step response time to 63% of value	Voltage mode: 18 Ã¼s max, Current mode: 1 ms max
Module conversion method	R-Ladder DAC, monotonicity with no missing codes
Outputs	4 voltage or current
Open circuit detection	Current mode only
Drive capability	Voltage: 1000 Ã© minimum, Current: 500 Ã© maximum
RTB torque	5069-RTB18-SCREW RTB only: 0.4 Nm (3.5 lbin)
Overvoltage protection, max	±32V DC
Short circuit detection	Voltage mode only Ã¢ output electronically limited to 16 mA or less
Data format	IEEE 32-bit floating point
Wire category	2 - shielded input ports, 2 - power ports, 1 wire per terminal for each signal port
Power dissipation, max	3.3 W
Indicators	1 green/red module status indicator, 4 yellow/red I/O status indicators
Thermal dissipation, max	11.3 BTU/hr
Accuracy drift with temperature	Voltage: 0.30% full scale, Current: 0.50% full scale
Resolution	16 bits across ±10.5V - 320 Ã¼V/bit, 16 bits across 10.5V - 160 Ã¼V/bit, 16 bits across 5.25V - 80 Ã¼V/bit, 16 bits across 21 mA - 320 nA/bit
Wire size	5069-RTB18-SPRING removable terminal block: 0.5...1.5 mm² (22...16 AWG) solid or stranded copper wire rated at 105 °C (221 °F), or greater, 2.9 mm (0.11 in.), max diameter including insulation, 5069-RTB18-SCREW removable terminal block: 0.5...1.5 mm² (22.
Calibrated accuracy	Voltage: 0.10% full scale @ 25 °C Current: 0.10% full scale @ 25 °C
Suitable for safety functions	No
Repeatability	0.05 %
Conversion time	Per channel: 25 µs
Output range, current	0...20 mA, 4...20 mA
Output range, voltage	±10V, 0...10V, 0...5V
Calibration methods	Factory calibrated, User-performed (optional)
Insulation stripping length	5069-RTB18-SPRING connections: 10 mm (0.39 in.), 5069-RTB18-SCREW connections: 12 mm (0.47 in.)
Width	22 mm
Height	144.57 mm
Depth	105.42 mm
Enclosure type	None (open-style)
Surrounding air temperature, max	60 °C
North American temperature code	T4
Operating temperature	0 °C
Emissions	IEC 61000-6-4
ESD immunity	6 kV contact discharges, 8 kV air discharges
EFT/B immunity	±4 kV @ 5 kHz on power ports, ±3 kV @ 5 kHz on shielded output ports
Relative humidity	5...95% noncondensing
Conducted RF immunity	10V rms with 1 kHz sine-wave 80% AM from 150 kHz...80 MHz
Surge transient immunity	±1 kV line-line (DM) and ±2 kV line-earth (CM) on power ports, ±2 kV line-earth (CM) on shielded output ports
Radiated RF immunity	10 V/m with 1 kHz sine-wave 80% AM from 80...2000 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 900 MHz, 10 V/m with 200 Hz 50% Pulse 100% AM @ 1890 MHz, 3 V/m with 1 kHz sine-wave 80% AM from 2000...2700 MHz
Nonoperating temperature	-40 °C
Voltage variation	10 ms interruption on MOD power port
SA power	150 mA @ 18...32V DC
SA power passthrough, max	9.95 A @18...32V DC
MOD power	75 mA @ 18...32V DC
MOD power passthrough, max	9.55 A @ 18...32V DC
Analog output ratings	±10V DC @ 0...20 mA per channel
RTB keying	None
Weight	175 g
Vibration	5 G @ 10...500 Hz
Shock	Operating: 30 G, Non operating: 50 G
Slot width	1
DIN rail	Compatible zinc-plated chromate-passivated steel DIN rail, You can use the EN50022 - 35 x 7.5 mm (1.38 x 0.30 in) DIN rail
Isolation voltage	250V (continuous), basic insulation type, 50V Functional isolation between SA power and input ports, No isolation between individual input ports
ATEX temp code	T4
IECEx temp code	T4