Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

ROCKWELL AUTOMATION 800H-PPT16M
ROCKWELL AUTOMATIONNon disponibile

800H PB, Type 7_9 Pilot Light, Transformer Type, PTT with Incandescent Lamp, Transformer Type, 120V AC 50/60 Hz, Incandescent Lamp, Multi-Color Insert Packet

Hazardous Location Type 7&9 Pilot Light, Standard Barrel Length, Xfmr, Push-to-Test, Incand., Multi-Color Pack, 120V AC 50/60 Hz
Cod. Articolo: 800H-PPT16M
Cod. Fornitore: 800H-PPT16M
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Number of contacts as normally closed contact1
Number of contacts as normally open contact1
Suitable for illuminationYes
Lamp typeIncandescent lamp
Rated supply voltage120V AC, 50/60 Hz
Rated operational current69VA @ 28...600V DC
Rated operational current, break720VA @ 72...120V AC
Rated operational current, make7200VA @ 120...600V AC
Power module typeTransformer or dual input
Operational voltage (Ue), max600V AC, 600V DC
Thermal continuous current (Ith), max10 A AC, 2.5 A DC
Utilization categoryAC-15 per IEC, DC-13 per IEC
Lamp test typePush-to-test
Dielectric strength2200V for 1 minute, 1300V for 1 minute (Logic Reed)
Electrical life cycle1000000 cycles at maximum rated load, 200000 cycles at maximum rated load (Logic Reed)
Spring-returnYes
Hole diameter30.5 mm
Type of electric connectionScrew connection
Mechanical life operations200000 min
Typical operating forces with contact blocks800T-XA: 1 lb
Shock1/2 cycle sine wave for 11 ms ≥25 G (contact fragility) and no damage at 100 G
Degree of protectionType 7 & 9 explosion proof (Type 3 and Type 4 ratings available with accessories)
Vibration10...2000 Hz, 1.52 mm displacement (peak-to-peak) maximum/10 G maximum (except Logic Reed)
Switching function latchingNo
Terminal screw torque6 lb.in
Wire gauge18 AWG
Typical operating force for illuminated push buttons and push-to-test pilot lights5.6 lb maximum
Material front ringPlastic
Finger-safe guardsNo guards on terminals
Lens colorMulti-color insert packet (amber, blue, green, red, white)
Contact blockFor push-to-test: 1 NO, 1 NC, standard contact block (800T-XA)
With front ringYes
Construction type lensRound
Operating temperature-20 °C
Humidity50% at 104 °F (40 °C)
Storage temperature-40 °C