Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account

Accedi ai servizi

Entra nella tua area riservata

Accedi al B2B
Accedi al tuo account
Paese|
||
ROCKWELL AUTOMATION 889D-F4WEDM-6
ROCKWELL AUTOMATION 889D-F4WEDM-6
ROCKWELL AUTOMATION 889D-F4WEDM-6
ROCKWELL AUTOMATIONNon disponibile

DC Micro Cable, Female, Straight (Int Threads), Female, Straight (int threads), 4-Pins, Standard Materials, 4-Pins, DC Micro, Male, Straight (ext. threads), Straight, Male(Ext. Threads), DC Micro (M12), Same as First End, ToughWeld Cbl, UnShld, 18AWG

Patchcord: DC Micro (M12), Female, Straight, 4-Pin, ToughWeld Cable, Unshielded, IEC Color Coded, DC Mic, Male, Straight, 6 meter (19.68 feet), 18AWG
Cod. Articolo: 889D-F4WEDM-6
Cod. Fornitore: 889D-F4WEDM-6
ROCKWELL AUTOMATION


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Caratteristiche Tecniche
Number of poles4
Degree of protection (IP), mountedIP69K
Operating temperature-50 °C
Number of pins4-pins
Second end conductorsSame as first end
Enclosure type ratingIP67, NEMA 6P, 1200 psi (8270 kPa) washdown, IP69K
First end connector styleFemale, straight (internal threads, except mini receptacles)
Cable typeAllen-Bradley toughlink TPE or toughweld CPE yellow jacket, 18 or 22 AWG conductors, 300V
MaterialCoupling nut: Epoxy-coated Zinc, Molded oil-resistant santoprene body, Contact: Gold over Nickel-plated Brass
Bend radius10 x diameter
Rated voltage250 V
Rated current In3 A
Assembly rating3 A @ 250V
Cable ratingToughlink: UL AWM style 20328 600V VW-1 105 °C to -50 °C water resistant, CSA AWM I/II A/B 105 °C 600V FT2, Toughweld: UL -50C SJOOW 90 °C dry and 60 °C water resistant, CSA -50 °C SJOOW 90 °C FT1
With shield connectionNo
Cable length6000 mm
Screw-in threadM12
Second end termination styleStraight, male (external threads)
Second end termination typeDC micro (M12)
Diameter, approxConnector: 14 mm (0.56 inch) @ straight male
Length, approxConnector: 50.8 mm (2.0 inch) @ straight male
Height, approxConnector: 31.8 mm (1.25 inch) @ right angle male
Product type featureStandard- Epoxy coated Zinc for DC micro,AC micro, mini QD with 2-6 pins, Standard-Nickel plated Brass for pico, Standard-Aluminum with clear sealant for mini QD with 7-12 pins
DiameterToughlink: 8 mm (0.32 inch), Toughweld: 9 mm (0.35 inch)
Material of contact surfaceGold
Material housingPlastic
Type of plug-in contact, inner sideFemale (bus)
Mounting methodFreely positionable