Automazione Industriale

Meccatronica

Sicurezza Industriale

Componenti Quadri

Sensori e Sistemi di Visione

Pneumatica

Network e Comunicazione

Cavi Speciali

Software di progettazione

Accedi ai servizi

Entra nella tua area riservata

Accedi ai servizi

Entra nella tua area riservata

TECO CAVI SPECIALINon disponibile

O.R. FRX-ST® PROFIBUS®

Cod. Articolo: 11604
Cod. Fornitore: 11604
TECO CAVI SPECIALI


Diminuisci la quantità
Aumenta la quantità
Caratteristiche Tecniche
Specifiche
Descrizione
Caratteristiche Tecniche
Formation:(1x2xAWG22/19)SN/ST
installation type:CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN
category:PROFIBUS®
standard/approval:CE/UL/CSA
shielding:SHIELDED
Specifiche
group // 1x2xAWG22conductor
material: Bare copper
capillary diameter: - Flexible (DIN VDE 0295, IEC 60228 or CEI 20-29)
conductors number: 2
rated section: AWG22 AWG
insulation
material: Foam polyolefin
colour: Green, Red.
total assembly make-upintermediate taping
on make-up: Around the total assembly. (optional)
material: Non-woven tape
total shield
on make-up: On the tape. Aluminium outside
material: Aluminium/polyester tape
shield shape: Overlapped shielding tape
coverage: >100 %
drain wire: Not available
total shield external
on make-up: On the tape shield.
material: Tinned copper
shield shape: Braid shield
coverage: 60 %
drain wire: Not available
total taping
on make-up: On the braid shield.
material: Non-woven tape
total sheath
material: PVC
colour: Violet RAL 4001 DESINA ®
diameter (mm): 8±0.35
Marking
Metric marking: P/N 11604 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 2571 80°C VW-1 - AWM I/II A/B 80°C 300V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. FRX-ST® (1x2xAWG22)H/H2 - year/week - batch - DESINA® - CE meter indication
electrical features
working voltage: 300 V
test voltage: 2000 V
rated capacity: <=30 pF/m
rated impedance: 150±10% ohm
electrical resistance: <=55,4 ohm/km
insulation resistance: 5 Gohm/km
transmission speed: Up to 12Mbit/s
attenuation: ***PROFIBUS® DP*** Attenuation Frequency[MHz]/attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/--/0,3 - 0,0384/--/0,5 - 0,2/--/0,5 - 4/--/2,2 - 16/--/4,4 - 20/- ATTENUAZIONE Frequenza[MHz]/attenuaz.standard(dB/100m)/Attenuaz.tipica[d 0,0096/--/0,3 - 0,0384/--/0,5 - 0,2/--/0,6 - 4/--/2,2 - 16/--/4,4 - 20/-
dynamic features
minimum bending radius static installation: 10 times ø cable
minimum bending radius dynamic installation: 12 times ø cable
working temperature static installation: -40°C / +80°C
working temperature dynamic installation: -5°C / +80°C
travel speed: Up to 120 m/min
acceleration/deceleration: Up to 4 m/sec²
cable length inside chain: Up to 10 m
chain length notes: (horizontal only)
guaranteed cycles: Up to 5 Mio
notes: The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department.
approvals and standards
reference standards: 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485
ul csa approvals: RU E244280 AWM STYLE 2571 80°C 300V CSA E244280 AWM I/II A/B 80°C 300V
fire behaviour: VW-1(UL); FT1(CSA); IEC 60332-1-2(EU)
industrial oil resistance: 1581(UL); IEC 60811-404(EU); CEI EN 50363-4-1(EU); ICEA S-82-552; IRM 902
halogen free: NO
Customs code
Customs-tariff number: 85444995
Made in: IT
Descrizione
CAVO FRX ( 1X2XAWG22/19)SN/ST PROF.

Altri prodotti correlati

Di seguito alcuni articoli correlati a quello che stai vedendo