Disponibile 
| Formation: | (1x2xAWG22/44)ST/SN |
| installation type: | CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN |
| category: | PROFIBUS® |
| standard/approval: | UL/CSA |
| shielding: | SHIELDED |
| group // 1x2x0,34 | conductor material: Bare copper capillary diameter: - Extra-flexible copper conductors number: 2 rated section: 0,34 mm² insulation material: Foam polyolefin colour: Green, Red. |
| total assembly make-up | intermediate taping on make-up: Around the total assembly. material: Polyester tape total shield on make-up: On the tape. material: Tinned copper shield shape: Braid shield coverage: >=85 % drain wire: Not available total shield external on make-up: On the braid shield material: Aluminized tape shield shape: Overlapped shielding tape coverage: 100 % drain wire: Not available total taping on make-up: on the braid shield material: Aluminized tape total sheath material: Polyurethane non-abrasive colour: Violet RAL 4001 DESINA ® diameter (mm): 8±0.35 Marking Metric marking: P/N 12746 - TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20236 80°C 30V VW-1 - AWM I/II A/B 80°C 30V FT1 - PROFIBUS - FLEXIBLE CONTROL DATA - BUS - DP - F.I.P. - 150ohm - O.R. PMXX-ST® (1x2xAWG22)H2/H - year/week - DESINA® meter indication information notes electrical features working voltage: 30 V test voltage: 500 V rated capacity: <=30 pF/m rated impedance: 150±10% ohm electrical resistance: <=55,4 ohm/km insulation resistance: >=1 Gohm/km transmission speed: Up to 12Mbit/s attenuation: *** PROFIBUS® DP*** ATTENUATION Frequency[MHz]/Attenuation.std(dB/100m)/Attenuation.typical[ 0,0096/--/0 200/--/0,7 - 16/--/4,9 - 20/--/5,4 dynamic features minimum bending radius static installation: 6 times ø cable minimum bending radius dynamic installation: 7.5 times ø cable working temperature static installation: -50°C / +80°C working temperature dynamic installation: -40°C / +80°C travel speed: Up to 200 m/min acceleration/deceleration: Up to 10 m/sec² cable length inside chain: Up to 15 m chain length notes: (horizontal only) guaranteed cycles: Up to 5 Mio notes: The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department. approvals and standards reference standards: 1581, UL 758(UL); C22.2 n° 210(CSA); DIN EN 61784-1, DIN EN 61158; NETBUS L2/F.I.P.(Factor,Instrumentation,Protocol), PROFIBUS® DP (DIN 19245), RS 485 ul csa approvals: RU E244280 AWM STYLE 20236 80°C 30V CSA E244280 AWM I/II A/B 80°C 30V fire behaviour: FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) industrial oil resistance: 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 halogen free: SI UV resistance: UV RESISTANT compatibility wiring/manufacturer: Siemens / 6XV1831-2L/J Customs code Customs-tariff number: 85444993 Made in: IT |
Di seguito alcuni articoli correlati a quello che stai vedendo