Non disponibile 
| Formation: | (4G1,50+2x0,50)ST Article no longermanaged |
| installation type: | CABLE FOR DYNAMIC INSTALLATION ON DRAG CHAIN |
| category: | SERVOMOTOR |
| standard/approval: | CE/UL/CSA |
| shielding: | SHIELDED |
| group 1 // Power conductors / 4G1,50 | conductor material: Bare copper capillary diameter: - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) conductors number: 4 rated section: 1,50 mm² insulation material: Polyolefin colour: UNEL with numbers: Black 1, Grey 2, Brown 3 + Green/Yellow |
| group 2 // Signal pair / 2x0,50 | conductor material: Bare copper capillary diameter: - Extra-flexible (DIN VDE 0295, IEC 60228 or CEI 20-29) conductors number: 2 rated section: 0,50 mm² insulation material: Polyolefin colour: White and Red. |
| total assembly make-up | intermediate taping on make-up: Around the total assembly. material: Non-woven tape total shield on make-up: On the tape. material: Tinned copper shield shape: Braid shield coverage: >=85 % drain wire: Not available total taping on make-up: On the shield. material: Non-woven tape total sheath material: Polyurethane non-abrasive colour: Orange RAL 2003 DESINA ® diameter (mm): 11.8±0.4 Marking Metric marking: P/N 27269 TE.CO. E244280 - Fxx - cRUus - AWM STYLE 20234 80°C 1000V VW-1 - AWM I/II A/B 80°C 1000V FT1 - (4GAWG16+2xAWG21)H2 - ''FLEXING'' - O.R. PMXX-ST® (4G1,5+2x0,5)H2 - IEC 60332-1-2 - year/week - DESINA® - CE meter indication electrical features working voltage: 1000 V test voltage: 4000 V dynamic features minimum bending radius static installation: 3 times ø cable minimum bending radius dynamic installation: 6 times ø cable working temperature static installation: -50°C / +80°C working temperature dynamic installation: -40°C / +80°C travel speed: Up to 240 m/min acceleration/deceleration: Up to 30 m/sec² cable length inside chain: Up to 20 m chain length notes: (horizontal only) guaranteed cycles: Up to 5 Mio torsions: Contact our Technical department notes: The given data are meant to be restricted to the type of reference installation. For fixed installation is meant to be without any mechanica stress. For application in dynamic installation with very low temperatures, contact our technical department. approvals and standards reference standards: 1581, UL 758(UL); C22.2 n° 210(CSA) ul csa approvals: RU E244280 AWM STYLE 20234 80°C 1000V CSA E244280 AWM I/II A/B 80°C 1000V fire behaviour: VW-1(UL); FT1(CSA); IEC 60332-1-2(EU) HALOGEN FREE: IEC 60754-1(EU) industrial oil resistance: 1581(UL); IEC 60811-404(EU); CEI EN 50363-10-2(EU); IRM 902 halogen free: SI UV resistance: UV RESISTANT Customs code Customs-tariff number: 85444999 Made in: IT |
Di seguito alcuni articoli correlati a quello che stai vedendo