Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

LEUZE 50114209
LEUZE 50114209
LEUZE 50114209
LEUZENot available

IS 240PP/44-8N0

Inductive switch
Product Code: 50114209
Partner cod.: 50114209
LEUZE


Diminuisci la quantità
Aumenta la quantità
Technical Specs
Technical Specs
Basic dataSeries: 240
Typ. operating range limit Sn: 8 mm
Operating range Sa: 0 ... 6.4 mm
Electrical dataProtective circuit: Inductive protection
Polarity reversal protection
Short circuit protected
Performance data
Supply voltage UB: 10 ... 30 V, DC
Residual ripple: 0 ... 20 %, From UB
Open-circuit current: 0 ... 20 mA
Repeatability, max. (in % of Sr): 10 %, For UB = 20 … 30 V DC, ambient temperature Ta = 23 °C ± 5 °C
Switching hysteresis: 5 %
Outputs
Number of digital switching outputs: 2 Piece(s)
Switching outputs: Array
Switching output 1: Array
Switching output 2: Array
Time behaviorSwitching frequency: 1,400 Hz
Readiness delay: 300 ms
ConnectionNumber of connections: 1 Piece(s)
Connection 1
Function: Signal OUT
Voltage supply
Type of connection: Cable
Cable length: 2,000 mm
Sheathing material: PVC
Cable color: Black
Number of conductors: 4 -wire
Wire cross section: 0.5 mm²
Mechanical dataDesign: Cubic
Dimension (W x H x L): 12 mm x 40 mm x 26 mm
Type of installation: Non-embedded
Housing material: Plastic
Plastic housing: PA 66
Sensing face material: Plastic, Polyamide (PA 66)
Net weight: 110 g
Housing color: Black
Red, RAL 3000
Type of fastening: Fastening on back
Through-hole mounting
Standard measuring plate: 12 x 12 mm², Fe360
Operation and displayType of display: LED
Number of LEDs: 1 Piece(s)
Environmental dataAmbient temperature, operation: -25 ... 70 °C
Ambient temperature, storage: -25 ... 70 °C
CertificationsDegree of protection: IP 67
Protection class: II
Certifications: c UL US
Test procedure for EMC in accordance with standard: IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
Standards applied: IEC 60947-5-2
Correction factorsAluminum: 0.4
Stainless steel: 0.8
Copper: 0.45
Brass: 0.55
Fe360 steel: 1