Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

LEUZE 50141476
LEUZE 50141476
LEUZE 50141476
LEUZENot available

ISS 212MM/44-8N0

Inductive switch
Product Code: 50141476
Partner cod.: 50141476
LEUZE


Diminuisci la quantità
Aumenta la quantità
Technical Specs
Technical Specs
Basic dataSeries: 212
Typ. operating range limit Sn: 8 mm
Operating range Sa: 0 ... 6.48 mm
Special versionSpecial version: Antivalent
Electrical dataProtective circuit: Polarity reversal protection
Short circuit protected
Transient protection
Performance data
Supply voltage UB: 10 ... 36 V, DC
Residual ripple: 0 ... 10 %, From UB
Open-circuit current: 0 ... 16 mA
Temperature drift, max. (in % of Sr): 19 %
Repeatability, max. (in % of Sr): 10 %
Switching hysteresis: 20 %
Outputs
Number of digital switching outputs: 2 Piece(s)
Switching outputs: Array
Switching output 1: Array
Switching output 2: Array
Time behaviorSwitching frequency: 2,000 Hz
Readiness delay: 50 ms
ConnectionNumber of connections: 1 Piece(s)
Connection 1
Function: Signal OUT
Voltage supply
Type of connection: Cable
Cable length: 2,000 mm
Sheathing material: PVC
Cable color: Gray
Number of conductors: 4 -wire
Wire cross section: 0.25 mm²
Mechanical dataDesign: Cylindrical
Thread size: M12 x 1 mm
Dimension (∅ x L): 12 mm x 50.8 mm
Type of installation: Non-embedded
Housing material: Metal
Metal housing: Nickel-plated brass
Sensing face material: Plastic, Polybutylene (PBT)
Net weight: 69 g
Housing color: Gray
Silver
Type of fastening: Mounting thread
Standard measuring plate: 24 x 24 mm², Fe360
Operation and displayType of display: LED
Number of LEDs: 1 Piece(s)
Environmental dataAmbient temperature, operation: -25 ... 70 °C
Ambient temperature, storage: -30 ... 80 °C
CertificationsDegree of protection: IP 67
Protection class: II
Certifications: c UL US
Test procedure for EMC in accordance with standard: EN 61000-4-2, -3, -4, -8
Correction factorsAluminum: 0.5
Stainless steel: 0.7
Copper: 0.3
Brass: 0.5
Fe360 steel: 1