Available 
| Product properties | Type: DIN rail module, one-piece Product type: Thermomagnetic device circuit breakers Product family: UT6-TMC Number of positions: 1 Number of connections: 2 Number of rows: 1 No. of channels: 1 Potentials: 1 Insulation characteristics Overvoltage category: II Degree of pollution: 2 |
| Electrical properties | No. of channels: 1 Fuse type: Automatic device Maximum power dissipation for nominal condition: ⤠1.41 VA General Operating voltage: 50 VAC ... 264 VAC (48 - 62 Hz) 5 VDC ... 30.8 VDC Rated voltage: 240 VAC (50/60Hz) 28 VDC 240 VAC (50/60Hz) 28 VDC Rated insulation voltage Ui: 440 VAC Rated current IN: 4 A Rated surge voltage: 2.8 kV Insulation resistance Riso: > 100 Mé (main contact) Type of actuation: S type Tripping method: TM (thermomagnetic) Tripping level: Trip-free mechanism (positive) Device resistance: 88 mé Required backup fuse: 16 A Rated short-circuit switching capacity Icn: 200 A (240VAC) 400 A (28 V DC) Dielectric strength: 2000 V Switching cycles, max.: 6000 (at 1 x In) 50 (at 1.5 x In) 40 (at 6 x In) Fuse: M1 (normal blow) Power dissipation: ⤠1.41 VA Temperature derating: 3.08 ADC (at -30°C) 3.24 ADC (at -20°C) 3.36 ADC (at -10°C) 3.48 ADC (at 0°C) 3.6 ADC (at 10°C) 4 ADC (at 23°C) 4.12 ADC (at 30°C) 4.32 ADC (at 40°C) 4.6 ADC (at 50°C) 4.84 ADC (at 60°C) Indicator/remote signaling Connection name: Auxiliary contact |
| Connection data | Nominal cross section: 6.00 mm² Rated cross section AWG: 8 Level 1 above 1 below 1 Screw thread: M4 Tightening torque: 1.5 ... 1.8 Nm Stripping length: 12 mm Conductor cross section rigid: 0.2 mm² ... 10 mm² Cross section AWG: 24 ... 8 (converted acc. to IEC) Conductor cross section flexible: 0.2 mm² ... 10 mm² Conductor cross section, flexible [AWG]: 24 ... 8 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve): 0.25 mm² ... 6 mm² Flexible conductor cross section (ferrule with plastic sleeve): 0.25 mm² ... 6 mm² 2 conductors with same cross section, solid: 0.2 mm² ... 2.5 mm² 2 conductors with same cross section, flexible: 0.2 mm² ... 2.5 mm² 2 conductors with same cross section, flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve: 0.5 mm² ... 4 mm² Nominal current: 4 A Nominal voltage: 240 VAC 28 VDC Nominal cross section: 6 mm² Main contact Connection method: Screw connection Screw thread: M4 Tightening torque: 1.5 Nm ... 18 Nm Stripping length: 12 mm Conductor cross section flexible: 0.2 mm² ... 10 mm² Conductor cross section rigid: 0.2 mm² ... 10 mm² Conductor cross section AWG: 24 ... 8 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 6 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 6 mm² |
| Dimensions | Width: 12.3 mm Height: 85.5 mm Depth: 89.5 mm |
| Material specifications | Flammability rating according to UL 94: V0 Insulating material: PA66 |
| Mechanical properties | Mechanical data Open side panel: No |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP40 (Actuation area) IP20 (Connection area) Ambient temperature (operation): -30°C ... 60°C Altitude: 2000 m (acc. to EN60934) |
| Standards and regulations | Standards/specifications: EN60934 UL1077 CSA22.2 EAC Note: No. 235 |
| Mounting | Mounting type: DIN rail: 35 mm Connection method: Screw connection |
| ECLASS | ECLASS-11.0: 27141116 ECLASS-12.0: 27141116 ECLASS-13.0: 27140401 |
| ETIM | ETIM 9.0: EC000899 |
| UNSPSC | UNSPSC 21.0: 39121400 |
Description other products
