1012737 PHOENIX CONTACT - Technology Bsa

REL-MR-110DC/21HC/MS - Single relay

Plug-in miniature relay, with power contact, 1 changeover contact, test button, mechanical switch position indicator, status LED, freewheeling diode, polarity A1+, A2-, input voltage 110 V DC

Product Code: 1012737

Partner cod.: 1012737

PHOENIX CONTACT

Product properties	Product type: Single relay Mechanical service life: 5x 10⁶cycles
Electrical properties	Service life electrical: see diagram Maximum power dissipation for nominal condition: 0.43 W Test voltage (Winding/contact): 5 kV AC (50Hz, 1min., winding/contact)
Input data	Coil side Nominal input voltage U_N: 110 VDC Input voltage range: 88 VDC ... 242 VDC (20°C) Drive and function: monostable Drive (polarity): non-polarized Typical input current at U_N: 3.6 mA Typical response time: 9 ms Typical release time: 6 ms
Output data	Switching Contact switching type: 1changeover contact Type of switch contact: Single contact Contact material: AgNi Maximum switching voltage: 250 V AC/DC Minimum switching voltage: 12 V (at 10 mA) Limiting continuous current: 16 A Maximum inrush current: 32 A (20ms) Min. switching current: 10 mA (at 12 V) Interrupting rating (ohmic load) max.: 4000 VA (for 250 V AC) Motor load according to UL 508: 1/4HP, 120VAC (N/O contact) 1/2HP, 240VAC (N/O contact)
Connection data	Connection method: Plug / solder connection
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/31d12b5fa5e40549afb72472815e1a9f/-S204x204-FJPG Width: 12.7 mm Height: 29 mm Depth: 25 mm
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C
Approvals	Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60
Standards and regulations	Standards/regulations: EN61810-1 VDE0435-201 EN50178