Industrial Automation
EV-CC-AC1-M3-CBC-RCM-ETH-3G - AC charging controller
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: AC charging controller Product family: CHARX control advanced plus Application: AC charging controller for private and commercial applications (EU/CN) Operating mode: Stand-Alone Client Server Charging mode: Mode 3, Case B + C |
System properties | Charging controllers Number of charging points: 1 |
Electrical properties | Type of charging current: AC Current consumption: < 3 W (No-load) Power consumption: < 10 W Locking release in the event of mains failure: Integrated release function of the locking actuator for disconnection of Infrastructure Plug and Infrastructure Socket Outlet Measuring current transducer Connection method: Connector Diameter of measuring coil: 15 mm Measuring range: Residual current Rated frequency fn: ⤠2000 Hz Nominal differential current: ± 300 mA Residual current IÃn: 30 mA (AC) 6 mA (DC) Rated current In: 32 A (Three-phase, 4x6mm²) 48 A (Single-phase) Tripping time for IÃn: < 180 ms Response time for 2 x IÃn: < 70 ms Tripping time for 5xIÃn: < 20 ms Supply Supply voltage: 230 V Supply voltage range: 100 VAC ... 240 VAC (nominal voltage range) Nominal power consumption: < 3 W (No-load) Power consumption: < 10 W (maximum) Frequency range: 50 Hz ... 60 Hz |
Input data | Digital Number of digital inputs: 5 Description of the input: Digital input Nominal current IN: ⤠4 mA Nominal input voltage UN: 12 V Input voltage range: 0 V ... 3 V (Off) Input voltage range U2: 9 V ... 15 V (On) |
Output data | Digital Output name: 4digital outputs Connection technology: Screw connection Maximum output voltage: 30 V Maximum output current: 0.2 A (Total current for all outputs; internally supplied) Maximum output current per channel: 0.6 A (Per output; externally supplied) Switching Output name: Relay output C1.2 Minimum switching capacity: 4000 VA Maximum switching voltage: 250 VAC (External supply) Max. switching current: 16 A Switchingâ Output name: Motor switching output Maximum switching voltage: 12 V (Internal supply) Max. switching current: 1 A (maximum) |
Connection data | Conductor connection Connection method: Screw connection Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Conductor connection â Connection method: Screw connection Conductor cross section rigid: 0.14 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1 mm² Conductor cross section AWG: 26 ... 16 |
Interfaces | Interface: Ethernet(1x) Cellular communication(3G/2G) Wireless Interface description: HSPA/GSM/GPRS/EDGE cellular interface for communicating with higher-level management systems using the OCPP 1.6J communication protocol Frequency: 900 MHz (HSPA) 2100 MHz (HSPA) 850 MHz (GSM/GPRS/EDGE) 900 MHz (GSM/GPRS/EDGE) 1800 MHz (GSM/GPRS/EDGE) 1900 MHz (GSM/GPRS/EDGE) Transmission power: 2 W (GSM 850 (Class 4)) 2 W (GSM 950 (Class 4)) 1 W (GSM 1800 (Class 1)) 1 W (GSM 1900 (Class 1)) + 24 dBm (UMTS/HSPA (Class 3)) Number: 1 Connection method: SMA (male) Impedance: 50 é SIM Interface: Micro SIM (3FF) Protocols supported: OCPP1.6J RS-485 Interface: RS-485 2-wire Bus system: RS-485 Connection method: Screw connection Number of interfaces: 1 (for energy measurement device and RFID reader) Number of supported devices: 2 Transmission speed range: 4.8 kbps ... 115.2 kbps (adjustable) Protocols supported: Modbus/RTU (Master) Ethernet Interface: Ethernet Connection method: RJ45 jack Number of interfaces: 1 Serial transmission speed: 10/100 Mbps Transmission length: 100 m Protocols supported: Modbus/TCP |
Signaling | Status display: 5x LEDs |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: < 2000 m Permissible humidity (operation): 30 % ... 95 % (non-condensing) |
Approvals | Conformity/Approvals Conformance: CE-compliant |
EMC data | Low Voltage Directive: Conformance with Low Voltage Directive 2014/35/EC Noise immunity: EN 61000-6-2 Immunity to the discharge of static electricity: EN 61000-4-2: 8 kV air, 4 kV contact discharge Immunity to electromagnetic fields: EN 61 000-4-3, 80---1000 MHz, 10 V/m Immunity to conducted high frequency: EN 61 000-4-6, 0.15...80 MHz, 10 V Immunity to fast transients (Burst): EN 61 000-4-4, 2 kV pos. and neg., 5 kHz Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Housing: DIN 43880 Noise emission: EN 61000-6-3 |
Standards and regulations | Standards Standards/regulations: IEC 61851-1 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: DIN rail mounting Mounting position: any |
ECLASS | ECLASS-11.0: 27144703 ECLASS-12.0: 27144703 ECLASS-13.0: 27144703 |
ETIM | ETIM 9.0: EC002889 |
UNSPSC | UNSPSC 21.0: 39121800 |