1026507 PHOENIX CONTACT - Technology Bsa

PRT-PV-P-1500/20-680 - Type 2 surge arrester

Surge protective device for space-saving PCB installation, in accordance with type 2/CLASSII, for 2-pol isolated 1500VDC voltage systems and for 3-phase power supply networks up to 690VAC in combination (L1, L2, L3, PE, N), with integrated remote indication contact in each plug, status indication on the module

Product Code: 1026507

Partner cod.: 1026507

PHOENIX CONTACT

Notes	General Note: For use in all low-voltage systems between L-PEN. Only for use in IT systems between L-PE if the bodies of the equipment in the low-voltage system are connected to the grounding system of the transformer station. (common grounding of the HV transformer station and the bodies of the LV consumer's installation. R_E = R_A according to IEC 60364-4-442/VDE 0100-442 Figure 44D/example a)
Product properties	IEC test classification: Ã¯² EN type: PVÃ¯² Product type: PV arrester Product family: PRINTRAB Installation location: Interior Installation location of the disconnect device: Internal Accessibility: Accessible Connection configuration: Y configuration SPD failure behavior: OCFM Insulation characteristics Overvoltage category: III Pollution degree: 2
Electrical properties	Nominal frequency f_N: 50 Hz (60Hz) Dielectric strength: < 5.8 kV DC (1min) < 4.2 kV AC (1min) Indicator/remote signaling Connection name: NC/NO Switching function: normal/deterioration Operating voltage: 30 VAC 30 VDC Operating current: 1 A AC 1 ADC
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/7c163b6322d195419144f8ceb34ee7d8/-S204x204-FJPG Width: 18.8 mm Height: 44 mm Depth: 41.9 mm (Without pin length)
Material specifications	Flammability rating according to UL 94: V-0 CTI value of material: 600 Insulating material: PBT 10 % GF / PA 6.6 Material group: I Housing material: PBT 10% GF/PA 6.6
Protective circuit	Nominal voltage U_N: 400VAC (TN) 690VAC (TN) 500VAC (IT) Nominal frequency f_N: 50 Hz (60Hz) Maximum continuous voltage U_C: 680 VAC (Single) Residual current I_PE: Ã¢¤ 20 µA (2 in series/Ucpv) Ã¢¤ 0.5 mA (Single/UREF) Nominal discharge current I_n (8/20) µs: 20 kA Maximum discharge current I_max (8/20) µs: 40 kA Short-circuit current rating I_SCCR: 25 kA Voltage protection level U_p: Ã¢¤ 2.7 kV (Single) Ã¢¤ 5.4 kV (2 serial connections) TOV behavior at U_T (L-N): 953 VAC () 953 VAC (120min/failsafe mode) Response time t_A: Ã¢¤ 25 ns Max. backup fuse with branch wiring: 125 A (aR) PV protective circuit Connection configuration: Y configuration SPD failure behavior: OCFM Protective circuit DC voltage side (DC) Maximum discharge current I_max (8/20) µs: 40 kA Response time t_A: Ã¢¤ 25 ns Recommended backup fuse maximum: 100 A (gG) Insulation resistance R_iso: > 5 MÃ© () Max. backup fuse with branch wiring: 125 A (aR) Nominal discharge current I_n (8/20) µs: 20 kA Continuous operating current I_CPV: Ã¢¤ 20 µA (2 serial connections) Maximum continuous operating voltage U_CPV: 800 VDC (Single) 1600 VDC (2 serial connections) Residual current I_PE: Ã¢¤ 20 µA (2 in series/Ucpv) Ã¢¤ 0.5 mA (Single/UREF) Voltage protection level U_p: Ã¢¤ 2.7 kV (Single) Ã¢¤ 5.4 kV (2 serial connections)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP00 Ambient temperature (operation): -40°C ... 85°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 5000 m (Standard insulation) Ã¢¤ 3000 m (Reinforced insulation) Permissible humidity (operation): 5 % ... 95 % Shock (operation): 25g (Half-sine / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation): 5g (10 ... 500 Hz / 2.5 h / X, Y, Z)
Standards and regulations	Standards/specifications: IEC 61643-11 EN61643-11 IEC 61643-31 EN61643-31
Mounting	Mounting type: PCB mounting