Industrial Automation
ELR 1-SC-230AC/600AC-20 - Solid-state contactor
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Solid-state contactor |
Electrical properties | Number of phases: 1 Maximum power dissipation for nominal condition: 20 W Mains type: 1-phase |
Input data | Control Input name: Control input Rated actuating voltage UC: 230 VAC Triggering voltage range: 24 VAC ... 275 VAC 24 VDC ... 190 VDC Rated actuating current IC: approx. 17 mA Switching threshold: ⤠5 V AC/DC (â0â signal) ⥠20 V AC/DC (â1â signal) Operating voltage display: Green LED Transmission frequency: 6 Hz |
Output data | Load output Operating voltage range: 42 VAC ... 660 VAC Rated operating current at AC-51: 20 A Rated operating current at AC-53a: 5 A (TA = 25°C) 5 A (TA = 40°C) Peak offstate voltage: 1200 V Mains frequency: 45 Hz 65 Hz Load current range: 150 mA ... 20 A (see to derating) Leakage current: < 3 mA (In off state) Residual voltage: < 1 V Surge current: 325 A (t=10ms) Max. load value: 525 A2s Protective circuit: Varistor Phase angle cos phi min: 0.5 |
Connection data | Control circuits Connection method: Screw connection Stripping length: 8 mm Screw thread: M3 Conductor cross section rigid: 0.5 mm² ... 2.5 mm² Conductor cross section flexible: 0.5 mm² ... 2.5 mm² Conductor cross section AWG: 18 ... 12 Load circuit Connection method: Screw connection Stripping length: 12 mm Screw thread: M4 Conductor cross section rigid: 2.5 mm² ... 6 mm² Conductor cross section flexible: 1 mm² ... 4 mm² Conductor cross section AWG: 14 ... 10 Protective conductor connection Connection method: Ring cable lug Screw thread: M5 Tightening torque: 1.5 Nm |
Signaling | Operating voltage display: Green LED |
Dimensions | Width: 18 mm Height: 110 mm Depth: 103 mm |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -30°C ... 70°C Ambient temperature (storage/transport): -40°C ... 80°C |
Standards and regulations | Standards/regulations Standards/regulations: EN61000-4-2 EN61000-4-3 EN61000-4-4 EN61000-4-5 EN55011 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: Can be aligned with ⥠22.5 mm spacing Mounting position: Vertical (horizontal DIN rail) |
ECLASS | ECLASS-11.0: 27371003 ECLASS-12.0: 27371003 ECLASS-13.0: 27371003 |
ETIM | ETIM 9.0: EC000066 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products