Industrial Automation
QUINT4-CAP/24DC/20/16KJ/EC - Capacity module
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Input data | Input voltage: 24 VDC (SELV) Input voltage range: 22.5 VDC ... 30 VDC Fixed backup threshold: < 22 VDC > 30 VDC Current consumption IN (UN, IOUT = IN, Icharge = 0): 20 A Current consumption Imax (UN, IOUT = IStat.Boost, Icharge = max): 30 A Current consumption INo-Load(UN, IOUT = 0, Icharge = 0): 0.1 A (No-load) Current consumption Icharge (UN, IOUT = 0, Icharge = max): 10 A (charging process) Power consumption Pmax (UN, IOUT = IStat.Boost, Icharge = max): 599 W Power consumption PN (UN, IOUT = IN, Icharge = 0): 488 W Power consumption Pcharge (UN, IOUT = 0, Icharge = max): 244 W Buffer time: 4 min. (2.5 A) 30 s (20A) Charging time: approx. 6.3 min. (2.5 A) approx. 2.1 min. (10A) Recharging time: approx. 5.4 min. (2.5 A) approx. 1.4 min. (10A) Inrush current: ⤠7 A (â¤4ms) Switch-on time: 1 ms (buffer mode) Internal input fuse: no Dielectric strength: max. 35 VDC (Reverse polarity protection) Voltage drop, input/output: 0.5 VDC |
Output data | Efficiency: > 98 % (with charged energy storage device) Connection in parallel: yes max. 4 Connection in series: No Mains operation Output voltage: 24 VDC Output current IN: 20 A Static Boost (IStat.Boost): 25 A Output power POUT (UN, IOUT = IN): 480 W Output power POUT (UN, IOUT = Istat.Boost): 600 W Power dissipation No load (UN, IOut = 0, ICharge = 0): 5 W Power dissipation Nominal load (UN, IOut = IN, ICharge = 0): 10 W Short-circuit-proof: yes (with input fuse) Idling-proof: yes Battery operation Output voltage: 24 VDC Output current IN: 20 A Static Boost (IStat.Boost): 25 A Output power POUT (UN, IOUT = IN): 480 W Output power POUT (UN, IOUT = Istat.Boost): 600 W Power dissipation No load (UN, IOut = 0, ICharge = 0): 5 W Power dissipation Nominal load (UN, IOut = IN, ICharge = 0): 90 W Short-circuit-proof: yes Idling-proof: yes |
Energy storage | General Capacity: 16 kJ Storage medium: Double-layer capacitor Buffer time: 4 min. (2.5 A) 30 s (20A) |
Connection data | Input Position: 1.x Connection technology Position marking: 1.1(+), 1.2 (+), 1.3 (-), 1.4 (-) Conductor connection Connection method: Screw connection rigid: 0.2 mm² ... 6 mm² flexible: 0.2 mm² ... 4 mm² flexible with ferrule without plastic sleeve: 0.25 mm² ... 4 mm² flexible with ferrule with plastic sleeve: 0.25 mm² ... 4 mm² rigid (AWG): 24 ... 10 Stripping length: 8 mm Tightening torque: 0.5 Nm ... 0.6 Nm Drive form screw head: Slotted L 2-conductor connection rigid: 0.2 mm² ... 1.5 mm² flexible: 0.2 mm² ... 1.5 mm² flexible with TWIN ferrule with plastic sleeve: 0.5 mm² ... 2.5 mm² Output Position: 2.x Connection technologyâ Position marking: 2.1(+), 2.2(-) Conductor connectionâ Connection method: Screw connection rigid: 0.2 mm² ... 6 mm² flexible: 0.2 mm² ... 4 mm² flexible with ferrule without plastic sleeve: 0.25 mm² ... 4 mm² flexible with ferrule with plastic sleeve: 0.25 mm² ... 4 mm² rigid (AWG): 24 ... 10 Stripping length: 8 mm Tightening torque: 0.5 Nm ... 0.6 Nm Drive form screw head: Slotted L 2-conductor connectionâ rigid: 0.2 mm² ... 1.5 mm² flexible: 0.2 mm² ... 1.5 mm² flexible with TWIN ferrule with plastic sleeve: 0.5 mm² ... 2.5 mm² Signal Position: 3.x Connection technologyââ Position marking: 3.1 (13), 3.2 (14), 3.3(Alarm), 3.4 (Ready), 3.5 (Remote), 3.6 (Parallel Port), 3.7 (SGnd) Conductor connectionââ Connection method: Push-in connection rigid: 0.2 mm² ... 1 mm² flexible: 0.2 mm² ... 1.5 mm² flexible with ferrule without plastic sleeve: 0.2 mm² ... 1 mm² flexible with ferrule with plastic sleeve: 0.2 mm² ... 0.75 mm² rigid (AWG): 24 ... 18 Stripping length: 8 mm |
Interfaces | Interface: EtherCAT Number of interfaces: 2 Connection method: RJ45 Position: 5.x Locking: Locking clip Transmission physics: Twisted-Pair Features: Autonegotiation full duplex Topology: Line Ring Transmission speed: 100 Mbps Transmission length: max. 100 m Cycle time: < 100 µs Access time: ⤠2 s Supported protocols: CoE Chipset: Renesas R-IN32M3 Electrical isolation: yes |
Signaling | Signal state Remote Connection labeling: 3.5 Channel: DI (digital input) State (configurable): Remote State condition: Remote Low signal: Connection to SGnd with <3ké High signal: Open Signal - state assignment: low - active Reference potential: 3.7 (SGnd, identical to1.3, 1.4, 2.2) Signal state Parallel port Connection labeling: 3.6 Channel: DI/DO (digital input/digital output) Switching input description: Connection terminal block communication, parallel operation State (configurable): Parallel Mode State condition (configurable): Not active:none Active: Output:buffer mode <1V Output: mains operation 24V(UN-1V(typical)) Input: Connected with SGnd: start buffer mode Switching voltage: < 1 V 24 V (UN - 1V (typical)) Current carrying capacity: 5 mA Reference potential: Different device, parallel port IN/OUT Signal state Alarm Connection labeling: 3.3 Channel: DO (digital output) Switching output: Transistor State (configurable): Group alarm State condition (configurable): Alarm threshold Output voltage: 27 V (UN - 1V (typical)) Output can be loaded: max. 20 mA State - signal assignment: active - low Reference potential: 3.7 (SGnd, identical to1.3, 1.4, 2.2) LED status indicator: red (Alarm) Signal state UIN OK Connection labeling: 3.1, 3.2 Channel: DO (digital output) Switching output: Electronic relays (OptoMOS) State (configurable): UIn OK State condition (configurable): UIn>22,5VDC, UIn<30VDC Output voltage: max. 30 V Output can be loaded: 300 mA State - signal assignment: active - high LED status indicator: green (UIn OK) Signal state Ready Connection labeling: 3.4 Channel: DO (digital output) Switching output: Transistor State (configurable): Ready State condition (configurable): State of charge = 100% or buffer mode Output voltage: 27 V (UN - 1V (typical)) Output can be loaded: max. 20 mA State - signal assignment: active - high Reference potential: 3.7 (SGnd, identical to1.3, 1.4, 2.2) LED status indicator: Green (state of charge - SOC) Signal ground SGnd Connection labeling: 3.7 Switching voltage: 0 V Current carrying capacity: max. 60 mA Function: Signal ground Reference potential: 3.3Alarm, 3.4Ready, 3.5Remote |
Electrical properties | Insulation voltage input, output / housing: 500 V |
Product properties | Product type: DC UPS with integrated capacitor Product family: QUINT capacity module MTBF (IEC 61709, SN 29500): 1351036 h (25°C) 903325 h (40°C) 470143 h (60°C) Insulation characteristics Protection class: III (Special application (SELV)) Overvoltage category: II Degree of pollution: 2 |
Dimensions | Item dimensions Width: 244 mm Height: 130 mm Depth: 125 mm Installation dimensions Installation distance right/left: 0 mm / 0 mm Installation distance top/bottom: 50 mm / 50 mm |
Mounting | Mounting type: DIN rail mounting Mounting position: horizontal DIN rail NS 35, EN 60715 |
Material specifications | Flammability rating according to UL94 (housing / terminal blocks): V0 Housing material: Metal |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25°C ... 60°C (>40°C Derating: 1%/K) Ambient temperature (storage/transport): -40°C ... 60°C Ambient temperature (start-up type tested): -40°C Maximum altitude: ⤠4000 m Climatic class: 3K3 (in acc. with EN 60721) Max. permissible relative humidity (operation): ⤠95 % Shock: 30g, 18ms per spatial direction (in accordance with IEC 60068-2-27) Vibration (operation): 0,7g |
Standards and regulations | Overvoltage category EN 61010-1: II(â¤4000m) EN61010-2-201: II(â¤4000m) UL60950-1: II(â¤4000m) Protective extra-low voltage Standard designation: Protective extra-low voltage Standards/specifications: IEC 61010-1 (SELV) IEC 61010-2-201 (PELV) |
Approvals | UL Identification: UL61010-1 ULâ Identification: UL61010-2-201 ULââ Identification: UL121201 ULâââ Identification: CAN/CSA-C22.2 No.61010-1-12 ULââââ Identification: CAN/CSAC22.2No.61010-2-201:14 ULâââââ Identification: CSAC22.2No.213-17 ClassI, Devsion2, GroupsA,B,C,D (HazardousLocation) CB scheme Identification: IEC 61010-1 IEC 61010-2-201 EN61010-1 EN61010-2-201 |
EMC data | Interference emission: Noise emission in accordance with EN61000-6-3 and EN61000-6-4 Noise immunity: Device immunity in accordance with EN 61000-6-2 Electromagnetic compatibility: Conformance with EMC Directive 2014/30/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeâ Contact discharge: 4 kV (Test Level 2) Discharge in air: 8 kV (Test Level 3) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldâ Frequency range: 80 MHz ... 1 GHz Test field strength: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)â Input: 2 kV (Test Level 3 - asymmetrical) Output: 2 kV (Test Level 3 - asymmetrical) Signal: 2 kV (Test Level 3 - asymmetrical) Comments: Criterion B Surge voltage load (surge) Standards/regulations: EN61000-4-5 Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceâ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself. |
ECLASS | ECLASS-11.0: 27040705 ECLASS-12.0: 27040705 ECLASS-13.0: 27040705 |
ETIM | ETIM 9.0: EC000382 |
UNSPSC | UNSPSC 21.0: 26111700 |
Description other products