Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 1094767
PHOENIX CONTACT 1094767
PHOENIX CONTACTNot available

PLC-RPT-24DC/1/SSI - Relay Module

PLC-INTERFACE, consisting of basic terminal block with Push-in connection and plug-in miniature relay with internal amplifier circuit and an appropriate auxiliary supply for weak signal sources, 1 N/O contact, 24VDC nominal input voltage
Product Code: 1094767
Partner cod.: 1094767
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesProduct type: Relay Module
Product family: PLC-INTERFACE
Application: weak signal sources
Operating mode: 100% operating factor
Mechanical service life: 2x 107 cycles
Electrical propertiesMaximum power dissipation for nominal condition: 0.2 W
Insulation characteristics: Coil/contact
Rated insulation voltage: 250 V
Rated impulse withstand voltage: 6 kV
Overvoltage category: III
Degree of pollution: 3
Supply
Nominal supply voltage: 24 VDC (Us)
Input current: 9 mA
Input dataCoil side
Nominal input voltage UN: 24 VDC
Input voltage range: 19.2 VDC ... 28.8 VDC
Drive and function: monostable
Drive (polarity): polarized
Typical input current at UN: 1 mA
Typical response time: 5 ms
Typical release time: 7 ms
Protective circuit: Surge protection
Operating voltage display: Yellow LED
Output dataSwitching
Contact switching type: 1 N/O contact
Type of switch contact: Single contact
Contact connection type: Power contact
Contact material: AgSnO
Maximum switching voltage: 250 V AC/DC
Minimum switching voltage: 12 V AC/DC
Limiting continuous current: 6 A
Maximum inrush current: 10 A (4 s)
Min. switching current: 10 mA
Short-circuit current: 200 A (conditional short-circuit current)
Interrupting rating (ohmic load) max.: 140 W (at 24 V DC)
20 W (at 48 V DC)
18 W (at 60 V DC)
23 W (at 110 V DC)
40 W (at 220 V DC)
1500 VA (for 250 V AC)
Switching capacity min.: 120 mW
Output fuse: 4 A gL/gG NEOZED
Connection dataConnection method: Push-in connection
Stripping length: 10 mm
Conductor cross section rigid: 0.14 mm² ... 2.5 mm²
Conductor cross section flexible: 0.14 mm² ... 2.5 mm²
0.2 mm² ... 2.5 mm² (Single ferrule)
2x 0.5 mm² ... 1 mm² (TWIN ferrule)
Conductor cross section AWG: 26 ... 14
DimensionsWidth: 6.2 mm
Height: 80 mm
Depth: 94 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection (Relay base): IP20 (Relay base)
Degree of protection (Installation location): ≥ IP54 (Installation location)
Ambient temperature (operation): -25°C ... 60°C
Ambient temperature (storage/transport): -40°C ... 85°C
Altitude: ≤ 2000 m
ApprovalsCE
Certificate: CE-compliant
UKCA
Certificate: UKCA-compliant
Shipbuilding approval
Certificate: TAE0000196
Corrosive gas test
Identification: ISA-S71.04. G3 Harsh Group
EN60068-2-60
DNV GL data
Temperature: D
Humidity: A
Vibration: B/C
EMC: B
Enclosure: Required protection according to the Rules shall be provided upon installation on board
EMC dataLow Voltage Directive: Conformance with Low Voltage Directive
Electromagnetic compatibility: Conformance with EMC directive
Standards and regulationsStandards/regulations: IEC 60947-5-1
Technical Specs
ECLASSECLASS-11.0: 27371601
ECLASS-12.0: 27371601
ECLASS-13.0: 27371601
ETIMETIM 9.0: EC001437
UNSPSCUNSPSC 21.0: 39122300
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00006.pdf

Approvals_01560.pdf

Approvals_01561.pdf

Approvals_01883.pdf

Manufacturer_declaration_03375.pdf

Manufacturer_declaration_03376.pdf

Manufacturer_declaration_03596.pdf

Manufacturer_declaration_06351.pdf

Package_slip_01741.pdf

Product_information_00033.pdf

Product_information_00063.pdf

Technical_drawing_08271.pdf