1104982 PHOENIX CONTACT - Technology Bsa

PSR-M-EF6-SDOR4-SC - Extension module

Safe extension module with 4safe relay outputs, 4reset inputs, TBUS interface, up to SIL3, Cat.4/PLe, pluggable screw terminal block, TBUS connector included

Product Code: 1104982

Partner cod.: 1104982

PHOENIX CONTACT

Product properties	Product type: Safety device Application: Safe shutdown Insulation characteristics Protection class: III Times Response time: see user manual Restart time: min. 5 s (Boot time) max. 10 s (Boot time)
Electrical properties	Maximum power dissipation for nominal condition: 7.07 W Nominal operating mode: 100% operating factor Interfaces: DIN rail TBUS for connection to the master module, supplied as standard Air clearances and creepage distances Rated insulation voltage: 250 VAC Rated surge voltage/insulation: Basic insulation 4 kV between all current paths and housing Supply Designation: A1/A2 Rated control circuit supply voltage U_S: 19.2 VDC ... 28.8 VDC 24 VDC -20%/+20% (external fuse, typically 4A) Rated control supply current I_S: typ. 120 mA Power consumption at U_S: typ. 2.88 W Inrush current: 2 A (Ãt=1ms at U_s) Filter time: typ. 5 ms (at A1 in the event of voltage dips at U_s) Protective circuit: Serial protection against polarity reversal
Input data	Digital: Reset inputs (FBK1, FBK2, FBK3, FBK4) Description of the input: IEC 61131-2 type 3 Number of inputs: 4 Input voltage range "0" signal: 0 VDC ... 5 VDC Input voltage range "1" signal: 11 VDC ... 28.8 VDC Input current range "0" signal: < 1 mA Filter time: 250 ms Ã±2ms (Test pulse rate>500ms) Cable length: max. 100 m (per input) Max. permissible overall conductor resistance: 1.2 kÃ© (Input and reset circuit at U_S) Current consumption: typ. 10 mA (typically with U_S) max. 13 mA (at a control voltage of 28.8VDC)
Output data	Relay: Enabling current paths (13_NO1/14_NO1,23_NO2/24_NO2,33_NO3/34_NO3,43_NO4/44_NO4) Output description: safety-related N/O contacts Number of outputs: 4 (1 NO per output) Contact switching type: 4 safe outputs Switching voltage: min. 10 V AC/DC max. 250 V AC/DC (Observe the load curve) Switching capacity: min. 200 mW Inrush current: min. 20 mA max. 6 A Switching capacity in accordance with IEC 60947-5-1: 3 A (250V (AC15)) 2 A (24V (DC13)) Limiting continuous current: 4 A (observe derating) Sq. Total current: 64 A² (for 4xsingle-channel,observe derating) 32 A² (for 2xtwo-channel,observe derating) Switching frequency: 0.5 Hz Mechanical service life: 40x 10⁶ switching cycles Output fuse: 4 A gL/gG
Connection data	Connection technology pluggable: yes Conductor connection Connection method: Screw connection Conductor cross section rigid: 0.2 mm² ... 2.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross-section AWG: 24 ... 12 Stripping length: 7 mm Screw thread: M3 Tightening torque: 0.5 Nm ... 0.6 Nm
Signaling	Status display: 4xLED (yellow) 4 x LED (green, yellow, red) 1 x LED (green), 2 x LED (orange) Operating voltage display: 1 x green LED Error indication: 2xLED (red)
Dimensions	Width: 22.61 mm Height: 112.58 mm Depth: 113.6 mm
Material specifications	Housing material: Polyamide PA non-reinforced
Characteristics	Safety data Stop category: 0 Safety data: ENISO13849 Performance level (PL): e (2-channel wiring) c (1-channel wiring) Safety data: IEC 61508 - High-demand for 2-channel wiring Safety Integrity Level (SIL): 3 Safety data: IEC 61508 - High-demand for 1-channel wiring Safety Integrity Level (SIL): 1 Safety data: ENIEC 62061 Safety Integrity Level (SIL): 3 (2-channel wiring) 1 (1-channel wiring)
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Min. degree of protection of inst. location: IP54 Ambient temperature (operation): -10°C ... 55°C (observe derating) Ambient temperature (storage/transport): -20°C ... 85°C Maximum altitude: Ã¢¤ 2000 m (Above sea level) Max. permissible humidity (storage/transport): 95 % (non-condensing) Max. permissible relative humidity (operation): 95 % (non-condensing) Shock: 10g for Ãt=16ms (continuous shock, 1000 shocks in each space direction) Vibration (operation): 10Hz...150Hz, amplitude 0.15mm, 2g
Approvals	CE Identification: CE-compliant
Mounting	Mounting type: DIN rail mounting Assembly instructions: Observe derating Mounting position: vertical or horizontal Connection method: Screw connection