Industrial Automation
Notes | General Note: LABS release âÃà in accordance with test specification VWPV3.10.7:2005-0 |
Product properties | Product type: Device circuit breakers Product family: CAPAROC Number of positions: 1 No. of channels: 1 Number of slots: 1 Insulation characteristics Protection class: III Pollution degree: 2 |
Electrical properties | No. of channels: 1 General Operating voltage: 10 VDC ... 30 VDC Rated voltage: 12 VDC 24 VDC Rated current IN: 4 ADC Rated current (pre-adjusted): 4 A Rated surge voltage: 0.5 kV Tripping method: E (electronic) Required backup fuse: Only required if Imax of the power supply > the short-circuit switching capacity. Integrated failsafe element. Short-circuit switching capacity: 300 A Dielectric strength: 35 VDC (Load circuit) Fuse: electronic Efficiency: > 99 % Closed circuit current I0: typ. 8.5 mA (no load at 24V) Power dissipation: typ. 0.2 W (no load at 24V) < 0.57 W (in nominal operation at 24V and 4A) Measuring tolerance I: Ãñ 15 % (typ.) MTBF (IEC 61709, SN 29500): 21274544 h (at 25°C with 21% load) 9809987 h (at40°C with 34.25%load) 1482752 h (at40°C with 100%load) Voltage drop: 0.09 V (at 4 A) Fail-safe element: 5 ADC (per output channel) Load circuit Shutdown time: 4 s (with overload 1.1âÃæ1.5xIN) 1 s (with overload 1.5âÃæ2.0xIN) 0.1 s (with overload 2.0âÃæ3.0xIN) typ. 10 ms (For short circuit > 3.0 x IN) Undervoltage switch-off: âÃä 8.5 VDC (active) âÃÃ¥ 9.2 VDC (inactive) Overvoltage switch-off: âÃÃ¥ 32.5 VDC (active) âÃä 30.5 VDC (inactive) Max. capacitive load: âÃä 20000 ÃõF (Depending on the current setting and the short-circuit current available) |
Connection data | Fuse-protected output Connection method: Push-in connection Stripping length: 10 mm Conductor cross section flexible: 0.2 mm² ... 4 mm² Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section AWG: 24 ... 12 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 4 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 4 mm² |
Signaling | Channel LED off: off (Channel switched off) Channel LED yellow: lit (Channel switched on, channel load>80%) flashing (Programming mode active) two flashes (Check the installation, no communication to power module) Channel LED green: lit (Channel switched on) Channel LED red: lit (Channel switched off, over- or undervoltage active) ON temporarily (Channel switched off, 5s cool-down phase, overload or short-circuit release) flashing (Channel switched off, ready to be switched back on, overload or short-circuit release) |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/18ea635f3257ea41bcffabbbc190edad/-S204x204-FJPG Width: 6.2 mm Height: 132.4 mm Depth: 111.3 mm (incl. DIN rail 7.5mm) |
Material specifications | Material: PA 6 PC Flammability rating according to UL 94: V-0 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -30°C ... 65°C (The temperature range of the power module must be taken into consideration) Ambient temperature (storage/transport): -40°C ... 70°C Altitude: âÃä 4000 m (amsl) Humidity test: 96h, 95%RH, 40°C Shock (operation): 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) 25g (6ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) 15g (6ms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock. If more than six CAPAROC E1 modules are used in the system.) Vibration (operation): 5g (10 ... 150Hz / 10cycles / axis / X,Y,Z) |
Approvals | UL approval Identification: UL/C-UL Listed UL 508 UL Recognized UL 2367 UL 121201 Class I, Division 2, Groups A, B, C, D, T4A NEC Class 2 according to UL 1310 |
Standards and regulations | Standards/specifications: EN61000-6-2 EN61000-6-3 EN60068-2-78 EN50178 EN60068-2-6 EN60068-2-27 Note: EMC âÃà Immunity for industrial areas EMC âÃà Emission for residential, business and commercial properties and small operations Environmental influences âÃà Moisture and heat, constant Equipping power installations with electronic equipment Environmental influences âÃà Vibrations (sinusoidal) Environmental influences âÃà Shocks |
Mounting | Mounting type: pluggable onto CAPAROC CRâÃæ current rail |
ECLASS | ECLASS-11.0: 27140401 ECLASS-12.0: 27140401 ECLASS-13.0: 27140401 |
ETIM | ETIM 9.0: EC003538 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products