1158056 PHOENIX CONTACT - Technology Bsa

REL-SR- 24DC/2X1AU/2X2AU/FG - Safety relays

Safety relay with force-guided contacts in accordance with DIN EN61810-3 (type A), input voltage 24VDC, with multi-layer gold contact, 2N/O contacts and 2N/C contacts

Product Code: 1158056

Partner cod.: 1158056

PHOENIX CONTACT

Product properties	Product type: Single relay Application: Forcibly guided contacts Operating mode: 100% operating factor Mechanical service life: approx. 10⁷ cycles B_10d: 810000 Cycles (AC15, 250V/0.5A, 1NO) 170000 Cycles (AC15; 250V/2A; 1NO) 318000 Cycles (DC13, 24V/1A, 1NO) 208000 Cycles (DC13, 24V/2A, 1NO) Insulation characteristics Insulation: Basic insulation Safe isolation, reinforced insulation and 6KV between the coil and the contact circuit and between the contacts 3-4, 5-6 to 7-8, 9-10 Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Safe isolation, reinforced insulation and 6KV between the coil and the contact circuit and between the contacts 3-4, 5-6 to 7-8, 9-10 Overvoltage category: III Pollution degree: 2
Electrical properties	Maximum power dissipation for nominal condition: 0.36 W Test voltage (Winding/contact): 4 kV_rms (50Hz, 1min., winding/contact) Test voltage (Contact/contact): 2.5 kV_rms (50Hz, 1min., contact/contact) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VAC Rated surge voltage: 4 kV
Input data	Coil side Nominal input voltage U_N: 24 VDC Input voltage range: 19.2 VDC ... 26.4 VDC Input voltage range in reference to U_N: see diagram Drive and function: monostable Drive (polarity): non-polarized Typical input current at U_N: 15 mA Typical response time: 10 ms Typical release time: 5 ms
Output data	Switching Contact switching type: 2N/O contacts, 2N/C contacts, force-guided Type of switch contact: Single contact Contact material: AgSnO, hard gold-plated Maximum switching voltage: 250 VAC 300 VDC Minimum switching voltage: 10 V Limiting continuous current: 6 A Maximum inrush current: 35 A (20ms) Min. switching current: 5 mA (10V) Interrupting rating (ohmic load) max.: 144 W (24VDC) 100 W (48VDC) 75 W (60VDC) 55 W (110VDC) 50 W (220VDC) 1500 VA (250VAC) Switching capacity: 2 A (24V, DC13) 3 A (230 V, AC15) Force-guided contacts in accordance with EN61810-3: TypeA
Connection data	Connection method: Plug / solder connection
Dimensions	Width: 13 mm Height: 24 mm Depth: 40 mm
Environmental and real-life conditions	Ambient conditions Degree of protection (Relay): RT II Degree of protection (Installation location): IP54 (Installation location) Ambient temperature (operation): -40°C ... 85°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 2000 m
Approvals	Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60
Standards and regulations	Air clearances and creepage distances between the power circuits Standards/regulations: DINEN50178 EN61810-1
Mounting	Mounting position: any