Industrial Automation
Product properties | Product type: Single relay Application: Forcibly guided contacts Operating mode: 100% operating factor Mechanical service life: approx. 107 cycles B10d: 810000 Cycles (AC15, 250V/0.5A, 1NO) 170000 Cycles (AC15; 250V/2A; 1NO) 318000 Cycles (DC13, 24V/1A, 1NO) 208000 Cycles (DC13, 24V/2A, 1NO) Insulation characteristics Insulation: Basic insulation Safe isolation, reinforced insulation and 6KV between the coil and the contact circuit and between the contacts 3-4, 5-6 to 7-8, 9-10 Insulation characteristics: Air clearances and creepage distances between the power circuits Insulation: Basic insulation Safe isolation, reinforced insulation and 6KV between the coil and the contact circuit and between the contacts 3-4, 5-6 to 7-8, 9-10 Overvoltage category: III Pollution degree: 2 |
Electrical properties | Maximum power dissipation for nominal condition: 0.36 W Test voltage (Winding/contact): 4 kVrms (50Hz, 1min., winding/contact) Test voltage (Contact/contact): 2.5 kVrms (50Hz, 1min., contact/contact) Air clearances and creepage distances between the power circuits Rated insulation voltage: 250 VAC Rated surge voltage: 4 kV |
Input data | Coil side Nominal input voltage UN: 24 VDC Input voltage range: 19.2 VDC ... 26.4 VDC Input voltage range in reference to UN: see diagram Drive and function: monostable Drive (polarity): non-polarized Typical input current at UN: 15 mA Typical response time: 10 ms Typical release time: 5 ms |
Output data | Switching Contact switching type: 2N/O contacts, 2N/C contacts, force-guided Type of switch contact: Single contact Contact material: AgSnO, hard gold-plated Maximum switching voltage: 250 VAC 300 VDC Minimum switching voltage: 10 V Limiting continuous current: 6 A Maximum inrush current: 35 A (20ms) Min. switching current: 5 mA (10V) Interrupting rating (ohmic load) max.: 144 W (24VDC) 100 W (48VDC) 75 W (60VDC) 55 W (110VDC) 50 W (220VDC) 1500 VA (250VAC) Switching capacity: 2 A (24V, DC13) 3 A (230 V, AC15) Force-guided contacts in accordance with EN61810-3: TypeA |
Connection data | Connection method: Plug / solder connection |
Dimensions | Width: 13 mm Height: 24 mm Depth: 40 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection (Relay): RT II Degree of protection (Installation location): IP54 (Installation location) Ambient temperature (operation): -40°C ... 85°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: ⤠2000 m |
Approvals | Corrosive gas test Identification: ISA-S71.04. G3 Harsh Group EN60068-2-60 |
Standards and regulations | Air clearances and creepage distances between the power circuits Standards/regulations: DINEN50178 EN61810-1 |
Mounting | Mounting position: any |
ECLASS | ECLASS-11.0: 27371601 ECLASS-12.0: 27371601 ECLASS-13.0: 27371601 |
ETIM | ETIM 9.0: EC001437 |
UNSPSC | UNSPSC 21.0: 39122300 |
Description other products