Not available 
| Dimensions | Width: 100 mm Height: 127 mm Depth: 75 mm Note on dimensions: The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715). External dimensions Width / Height / Depth: 100 mm / 127 mm / 75 mm (The depth applies when a TH 35-7.5 DIN rail is used (in accordance with EN 60715).) |
| Notes | General: If the SPLC-3000 is operated with AXC F 2152, the AXC BS L 2 bus base module must be used. Note on application Note on application: Only for industrial use |
| System properties | Processor: Armî Cortexî-A9 800 MHz (CPU1) Armî Cortexî-A8 600 MHz (CPU2) Function Safety function: yes System requirements Engineering tool: PLCnext Engineer |
| Product properties | Product type: I/O component Product family: PLCnext Control Extension Type: modular Data management status Article revision: 06 Insulation characteristics Protection class: III (IEC 61140, EN 61140, VDE 0140-1) |
| Electrical properties | Maximum power dissipation for nominal condition: typ. 5.52 W Supply Supply voltage: 24 V DC Supply voltage range: 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Max. current consumption: 350 mA Typical current consumption: 230 mA Potentials: Supply of the logic voltage U Supply voltage: 24 V DC Supply voltage range: 19.2 V DC ... 30 V DC (including all tolerances, including ripple) Current draw: max. 350 mA typ. 230 mA Protective circuit: Reverse polarity protection; Polarity protection diode Transient protection; Suppressor diode |
| Connection data | Connection technology Connection name: Axioline F connector Conductor connection Connection method: Push-in connection Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm Axioline F connector Connection method: Push-in connection Conductor cross section, rigid: 0.2 mm² ... 1.5 mm² Conductor cross section, flexible: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Stripping length: 8 mm |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -25 °C ... 60 °C up to 2000 m above mean sea level -25 °C ... 55 °C up to 3000 m above mean sea level -25 °C ... 50 °C up to 4000 m above mean sea level Ambient temperature (storage/transport): -40 °C ... 85 °C Permissible humidity (operation): 5 % ... 95 % (according to DIN EN 61131-2) Permissible humidity (storage/transport): 5 % ... 95 % (according to DIN EN 61131-2) Shock (operation): 30g (in accordance with EN 60068-2-27/IEC 60068-2-27) Shock (storage/transport): 30g (in accordance with EN 60068-2-27/IEC 60068-2-27) Vibration (operation): 5g (in accordance with EN 60068-2-6/IEC 60068-2-6) Vibration (storage/transport): 5g (in accordance with EN 60068-2-6/IEC 60068-2-6) Air pressure (operation): 70 kPa ... 106 kPa (up to 3000 m above sea level) Air pressure (storage/transport): 58 kPa ... 106 kPa (up to 4500 m above mean sea level) Resistance to gases that may endanger the functions, in acc. with DIN 40046-36, DIN 40046-37: Use of the device in these ambient conditions is prohibited. |
| Mounting | Mounting type: DIN rail mounting |
Description other products
