1234354 PHOENIX CONTACT - Technology Bsa

TC ROUTER 4202T-4G EU WLAN - Router

Industrial 4G LTE router, EU device, 3G (UMTS/HSPA) and 2G (GPRS/EDGE) fallback, WLAN access point 802.11a/b/g/n, 150Mbps, 2.4GHz+5GHz, 2-port switch, firewall, NAT, IPsec and OpenVPN support, 2 DI, 1 DO, RS-232/RS-485

Product Code: 1234354

Partner cod.: 1234354

PHOENIX CONTACT

Notes	Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area
Product properties	Product type: Cellular router Application: Ethernet RS-232 RS-485 MTTF: 384 Years (SN29500 standard, temperature25°C, operating cycle21%) 180 Years (SN29500 standard, temperature40°C, operating cycle34.25%) 64 Years (SN29500 standard, temperature40°C, operating cycle100%)
Electrical properties	Electrical isolation: VCC // LTE // Ethernet // PE Maximum power dissipation for nominal condition: 4.32 W Mains type: Cellular communication Supply Supply voltage range: 10 VDC ... 30 VDC (Via pluggable Push-in terminal block) Typical current consumption: < 180 mA (24VDC) < 500 mA (10VDC) Ã¢¤ 3 mA (With activated energy-saving mode) Max. current consumption: 1.5 A Function Management: Web-based management SNMPv1/v2/v3 SSHv2 Telnet TOM (TCROUTEROnlineManager, management software from PhoenixContact) Data storage system: Micro SDHC card
Input data	Digital Description of the input: Digital input Number of inputs: 2 Voltage input signal: 10 VDC ... 30 VDC Switching level "0" signal: < 8 VDC Switching level "1" signal: 10 VDC ... 30 VDC
Output data	Signal Output name: Digital output Number of outputs: 1 Voltage output signal: 10 VDC ... 30 VDC (depending on the operating voltage) Current output signal: Ã¢¤ 50 mA (Not short-circuit proof)
Connection data	Supply Connection method: Push-in spring connection Conductor cross section flexible, with ferrule without plastic sleeve: 0.25 mm² ... 1.5 mm² Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.25 mm² ... 0.75 mm² Single conductor/terminal point, rigid: 0.14 mm² ... 1.5 mm² Single-wire/terminal point, flexible: 0.14 mm² ... 1.5 mm² Conductor cross section, flexible [AWG]: 26 ... 16 Stripping length: 9 mm
Interfaces	Web server: yes Data: Ethernet interface, 10/100Base-T(X) in accordance with IEEE 802.3 Serial transmission speed: 10/100 Mbps, auto negotiation Connection method: RJ45 jack, shielded No. of channels: 2 Transmission length: 100 m (shielded twisted pair) Protocols supported: TCP/IP, UDP/IP, HTTP(S), (S)FTP, TFTP, SCEP, RADIUS VPN: IPsec, OpenVPN, GRE, L2TP, PPTP Network Discovery: LLDP, CDP, FDP, SONMP, EDP, IRDP Auxiliary protocols: ARP, DHCP, DNS, DynDNS, PING (ICMP), SMTP(S), NTP, SSL/TLS, STARTTLS, SMS Data: RS-232 interface in accordance with EIA-232 Serial transmission speed: Ã¢¤ 1000 kbps Connection method: Push-in spring connection Transmission length: 15 m Data: RS-485 interface in accordance with EIA-485 Serial transmission speed: Ã¢¤ 1000 kbps Connection method: Push-in spring connection Termination resistor: 120 Ã© (can be set via software) Wireless Interface description: GSM / GPRS / EDGE / UMTS / HSPA / LTE (FDD) Frequency range: 800 MHz (LTE B20) 850 MHz (LTE B5) 900 MHz (LTE B8) 1800 MHz (LTE B3) 2100 MHz (LTE B1) 2600 MHz (LTE B7) 850 MHz (UMTS/HSPA B5) 900 MHz (UMTS/HSPA B8) 1900 MHz (UMTS/HSPA B2) 2100 MHz (UMTS/HSPA B1) 850 MHz (2 W (EGSM)) 900 MHz (2 W (EGSM)) 1800 MHz (1W (EGSM)) 1900 MHz (1W (EGSM)) Data rate: Ã¢¤ 150 Mbps (LTE, DL) Ã¢¤ 50 Mbps (LTE, UL) Antenna: 50 Ã© impedance SMA antenna socket Antenna connection method: SMA (female) SIM Interface: Micro SIM (3FF) eSIM (several profiles) GPRS: Class 12, Class B CS1 ... CS4 EDGE: Multislot Class12 UMTS: HSPA 3GPP R8 LTE: CAT4 Country support: Europe WirelessÃ¢ Interface description: WLAN in accordance with IEEE802.11 a/b/g/n Operating mode: Access point (maximum of 10clients) Client Dual mode Mesh Frequency: 5 GHz 2.4 GHz Data rate: 11 Mbps (2.4GHz, 20MHz, /b) 54 Mbps (2.4GHz, 20MHz, /g) 144 Mbps (2.4GHz, 20MHz, /n) 54 Mbps (5GHz, 20MHz, /a) 150 Mbps (5GHz, 40MHz, /n) Antenna connection method: RSMA (female) Security: WPA, WPA2 (TKIP, CCMP, PSK, RADIUS)
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/6fb484508269b6459b592ecf2208e9f8/-S204x204-FJPG Width: 45 mm Height: 130 mm Depth: 130 mm
Material specifications	Material: Polycarbonate
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -40°C ... 70°C Ambient temperature (storage/transport): -40°C ... 85°C Altitude: Ã¢¤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Permissible humidity (operation): 10 % ... 95 % (non-condensing) Permissible humidity (storage/transport): 10 % ... 95 % (non-condensing)
Approvals	CE Certificate: CE-compliant Wireless approval USA, FCC Certificate: Z64-WL18DBMOD Note: FCC directive, part15
EMC data	Noise immunity: EN 61000-6-2 Electromagnetic compatibility: Conformance with RED Directive 2014/53/EU Electrostatic discharge Standards/regulations: EN61000-4-2 Electrostatic dischargeÃ¢ Contact discharge: ± 6 kV (Test Level 3) Discharge in air: ± 8 kV (Test Level 3) Comments: Criterion B Electromagnetic HF field Standards/regulations: EN61000-4-3 Electromagnetic HF fieldÃ¢ Frequency range: 80 MHz ... 3 GHz (Test Level 3) Field intensity: 10 V/m Comments: Criterion A Fast transients (burst) Standards/regulations: EN61000-4-4 Fast transients (burst)Ã¢ Input: ± 2 kV (Test Level 3) Signal: ± 2 kV (Ethernet) Comments: Criterion B Surge current load (surge) Standards/regulations: EN61000-4-5 Surge current load (surge)Ã¢ Input: ± 0.5 kV (symmetrical) ± 1 kV (asymmetrical) Signal: ± 1 kV (Data line, asymmetrical) Comments: Criterion B Conducted interference Standards/regulations: EN61000-4-6 Conducted interferenceÃ¢ Frequency range: 0.15 MHz ... 80 MHz Comments: Criterion A Voltage: 10 V Emitted interference Radio interference voltage in acc. with EN 55011: ClassB, area of application: Industry and residential Emitted radio interference in acc. with EN 55011: ClassB, area of application: Industry and residential Criteria Criterion A: Normal operating behavior within the specified limits. Criterion B: Temporary impairment to operational behavior that is corrected by the device itself.
Mounting	Mounting type: DIN rail mounting