Industrial Automation
Notes | General Note: The current is determined by the fuse used, the voltage by the fuse or selected light indicator. When using fuse terminal blocks in a compound arrangement, the D-UT2,5/4-TWIN end cover (3047141) must be inserted at each fuse terminal block or a UT2,5-MTS-EX terminal block (1277636) must be used between each fuse terminal block. When using partition plates between the fuse terminal blocks, FBS bridges cannot be used due to the separation. |
Product properties | Product type: Fuse terminal block Area of application: Process industry Machine building Plant engineering Number of connections: 2 Number of rows: 1 Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
Electrical properties | Fuse type: Glass / ceramics / ... Rated surge voltage: 6 kV Maximum power dissipation for nominal condition: 0.77 W Fuse: G / 5 x 20 Maximum power dissipation: max. 1.6 W (with single arrangement of the fuse terminal block in the event of overload) max. 1.6 W (With interconnected arrangement of several fuse terminal blocks in the event of overload) max. 4 W (with single arrangement of the fuse terminal block in the event of a short-circuit) max. 2.5 W (With interconnected arrangement of several fuse terminal blocks in the event of a short-circuit) |
Connection data | Number of connections per level: 2 Nominal cross section: 2.5 mm² Screw thread: M3 Tightening torque: 0.5 Nm Stripping length: 9 mm Internal cylindrical gage: A3 |
Ex data | Rated data (ATEX/IECEx) Identification: ï II3GEx ec llC Gc Operating temperature range: -50°C ... 130°C Ex-certified accessories: 3047141 D-UT 2,5/4-TWIN 1205053 SZS 0,6X3,5 3022276 CLIPFIX 35-5 3022218 CLIPFIX 35 List of bridges: Plug-in bridge/FBS 2-5/3030161 Plug-in bridge/FBS 3-5/3030174 Plug-in bridge/FBS 4-5/3030187 Plug-in bridge/FBS 5-5/3030190 Plug-in bridge/FBS 10-5/3030213 Plug-in bridge/FBS 20-5/3030226 Bridge data: 6.3 A/2.5 mm² Rated voltage: 275 V Rated insulation voltage: 250 V output: (Permanent) Ex level General Rated current: 6.3 A (2.5mm²) Maximum load current: 6.3 A (4mm²) Contact resistance: 0.5 mé Ex connection data General Torque range: 0.5 Nm ... 0.6 Nm Nominal cross section: 2.5 mm² Rated cross section AWG: 14 Connection capacity rigid: 0.14 mm² ... 4 mm² Connection capacity AWG: 26 ... 12 Connection capacity flexible: 0.14 mm² ... 4 mm² 2 conductors with same cross section, solid: 0.14 mm² ... 1.5 mm² 2 conductors with the same cross-section AWG rigid: 26 ... 16 2 conductors with same cross section, stranded: 0.14 mm² ... 1.5 mm² 2 conductors with the same cross-section AWG flexible: 26 ... 16 Conductor cross section flexible, with ferrule without plastic sleeve min.: 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max.: 2.5 mm² Single conductor/terminal point, flexible, with ferrule, without plastic sleeve, AWG: 26 ... 14 |
Dimensions | Width: 6.2 mm Height: 57.8 mm Depth on NS35/7,5: 75.6 mm Depth on NS35/15: 83.1 mm |
Material specifications | Color: black Flammability rating according to UL 94: V0 Insulating material group: I Insulating material: PA Static insulating material application in cold: -60°C Relative insulation material temperature index (Elec., UL 746 B): 130°C Fire protection for rail vehicles (DIN EN 45545-2) R22: HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23: HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24: HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26: HL 1 - HL 3 Surface flammability NFPA 130 (ASTM E 162): passed Specific optical density of smoke NFPA 130 (ASTM E 662): passed Smoke gas toxicity NFPA 130 (SMP 800C): passed |
Mechanical properties | Mechanical data Open side panel: No |
Environmental and real-life conditions | Oscillation/broadband noise Specification: DINEN50155 (VDE0115-200):2018-05 Spectrum: Service life test category2, bogie-mounted Frequency: f1 = 5 Hz to f2 = 250 Hz ASD level: 6.12 (m/s²)²/Hz Acceleration: 3.12g Test duration per axis: 5 h Test directions: X-, Y- and Z-axis Result: Test passed Shocks Specification: DINEN50155 (VDE0115-200):2018-05 Pulse shape: Half-sine Acceleration: 30g Shock duration: 18ms Number of shocks per direction: 3 Test directions: X-, Y- and Z-axis (pos. and neg.) Result: Test passed Ambient conditions Ambient temperature (operation): -60°C ... 105°C (max. short-term operating temperature RTI Elec.) Ambient temperature (storage/transport): -25°C ... 60°C (for a short time, not exceeding 24h, -60°C to +70°C) Ambient temperature (assembly): -5°C ... 70°C Ambient temperature (actuation): -5°C ... 70°C Permissible humidity (storage/transport): 30 % ... 70 % |
Mounting | Mounting type: NS 35/7,5 NS35/15 |
ECLASS | ECLASS-11.0: 27141116 ECLASS-12.0: 27141116 ECLASS-13.0: 27250113 |
ETIM | ETIM 9.0: EC000899 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products