1278798 PHOENIX CONTACT - Technology Bsa

VFC-PT/FLK14/PLC - Interface module

VARIOFACE Front Connect, IDC/FLK termination board for the system cabling with Push-in front connections for 8channels and additional positive and negative potential terminal blocks for 3-conductor initiator connection, number of positions: 14, overall width: 19mm

Product Code: 1278798

Partner cod.: 1278798

PHOENIX CONTACT

Product properties	Product type: Interface module Number of positions: 14 No. of channels: 8 Insulation characteristics Insulation: Functional insulation Insulation characteristics: Air clearances and creepage distances Insulation: Functional insulation Overvoltage category: II Pollution degree: 2
Electrical properties	No. of channels: 8 Max. permissible operating voltage: 30 VAC 60 VDC Max. permissible current: 1 A (per branch) Air clearances and creepage distances Rated insulation voltage: 63 V Rated surge voltage: 0.8 kV (1.2/50 Ã¼s) Supported controller SIEMENS S7-1500 Suitable I/O card: 6ES7521-1BH00-0AB0 6ES7521-1BH10-0AA0 6ES7521-1BH50-0AA0 6ES7521-1BL00-0AB0 6ES7521-1BL10-0AA0 6ES7522-1BH00-0AB0 6ES7522-1BH01-0AB0 6ES7522-1BL00-0AB0 6ES7522-1BL01-0AB0 6ES7522-1BL10-0AA0 6ES7523-1BL00-0AA0 Supported controller ALLEN-BRADLEY ControlLogix Suitable I/O card: 1756-IB32 1756-OB32 1756-IN16 1756-IB16 1756-IC16 1756-OB16E Supported controller ALLEN-BRADLEY PLC 5 Suitable I/O card: 1771 IBN 1771 OBN Supported controller ALLEN-BRADLEY SLC 500 Suitable I/O card: 1746 OB 32 1746 OV 32 1746 IB 32 1746 IV 32 Supported controller GE-FANUC RX3i Suitable I/O card: IC694MDL754 IC694MDL660 Supported controller HONEYWELL Experion PKS C200 Suitable I/O card: TC-IDD 321 TC-ODD 321 Supported controller MITSUBISHI MELSEC Q Suitable I/O card: QX81 QY81P QX41 QX41-S1 QX42 QX42-S1 QX71 QX72 QY41P QY42P QY71 QH42P QX82 QX82-S1 QY82P Supported controller MITSUBISHI MELSEC L Suitable I/O card: LX41C4 LX42C4 LY41NT1P LY42NT1P LY41PT1P LY42PT1P Supported controller SCHNEIDER ELECTRIC Modicon TSX QUANTUM Suitable I/O card: DDI 353 DDI 853 DAI 453 DDO 353 Supported controller SIEMENS ET 200SP Suitable I/O module: 6ES7131-6BH01-0BA0 (Base Units A0/A1) 6ES7131-6BH01-2BA0 (Base Units A0/A1) 6ES7132-6BH01-0BA0 (Base Units A0/A1) 6ES7132-6BH01-2BA0 (Base Units A0/A1)
Connection data	Controller level Connection in acc. with standard: IEC 60603-13 DIN41651 Connection method: IDC/FLK pin strip Number of connections: 1 Number of positions: 14 Field level Connection method: Push-in connection Stripping length: 10 mm Number of positions: 28 Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² 0.25 mm² ... 1.5 mm² (Ferrules without plastic sleeve) 0.25 mm² ... 1.5 mm² (Ferrule with plastic sleeve) Conductor cross section AWG: 24 ... 16
Signaling	Status display: No Status display present: No
Dimensions	Item dimensions Width: 18.9 mm Height: 127.2 mm Depth: 55 mm
Material specifications	Flammability rating according to UL 94: V0
Environmental and real-life conditions	Ambient conditions Degree of protection: IP20 Degree of protection (Installation location): IP54 (Installation location) Ambient temperature (operation): -40°C ... 70°C (Ã¢¤2000m) -40°C ... 63°C (2001m - 3000m) Altitude: Ã¢¤ 3000 m
Approvals	UL, USA/Canada Identification: UL 61010-2-201 CSA, USA/Canada Identification: CSAC22.2 NO.61010-2-201
Standards and regulations	Air clearances and creepage distances Standards/regulations: DINEN60664-1
Mounting	Mounting type: DIN rail mounting Mounting position: any
Notes	General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.