Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access services

Enter your reserved area

PHOENIX CONTACT 2908400
PHOENIX CONTACTNot available

UM-2KS50/32R/SI/J/ADV551/YCS - Active module

32-channel output relay module with screw connection and redundant, 50-pos. system connection, fuse and jumper in every output circuit, for Yokogawa ADV551 and ADV561
Product Code: 2908400
Partner cod.: 2908400
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Download
Tecnichal data
Product propertiesProduct type: Interface module
Operating mode: 100% operating factor
Mechanical service life: 2x 107 cycles
Insulation characteristics: Air clearances and creepage distances
Overvoltage category: II
Pollution degree: 2
Electrical propertiesAir clearances and creepage distances
Rated insulation voltage: 50 VAC
Rated surge voltage: 0.5 kV (Functional insulation)
Supported controller YOKOGAWA CENTUM VP
Suitable I/O card: ADV551
ADV561
NFDV551
NFDV561
Input dataNominal input voltage UN: 24 VDC
Input voltage range in reference to UN: 0.8 ... 1.2
Input voltage range: 19.2 VDC ... 28.8 VDC
Typical input current at UN: 7 mA
Typical response time: 5 ms
Typical release time: 6 ms
Protective circuit: Freewheeling diode; Freewheeling diode
Status display/channel: green LED
Output dataSwitching
Contact switching type: 1 N/O contact
Type of switch contact: Single contact
Contact material: AgSnO
Maximum switching voltage: 250 VAC
63 VDC
Minimum switching voltage: 5 V (100 mA)
Limiting continuous current: 1.5 A (32°C)
1 A (45°C)
0.5 A (50°C)
Max. total current of voltage supply: 10 A (50°C)
Min. switching current: 1 mA (24V)
Interrupting rating (ohmic load) max.: 48 W (24VDC)
20 W (48VDC)
18 W (60VDC)
500 VA (250VAC)
Connection dataController level
Connection method: Yokogawa KS-compatible
Number of connections: 1
Number of positions: 50
Field level
Connection method: Screw connection
Number of connections: 32
Number of positions: 2
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
Supply
Connection method: Screw connection
Number of connections: 4
Number of positions: 2
Conductor cross section rigid: 0.2 mm² ... 4 mm²
Conductor cross section flexible: 0.2 mm² ... 2.5 mm²
Conductor cross section AWG: 24 ... 12
SignalingStatus display present: Yes
DimensionsDimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/2fd319e0cc6d544e92c27468d128f13e/-S204x204-FJPG
Width: 271.5 mm
Height: 127.5 mm
Depth: 60.5 mm
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP00
Degree of protection (Installation location): ≥ IP54 (Installation location)
Ambient temperature (operation): -20°C ... 50°C
Ambient temperature (storage/transport): -20°C ... 80°C
Altitude: ≤ 2000 m
Permissible humidity (operation): 10 % ... 95 % (non-condensing)
Standards and regulationsAir clearances and creepage distances
Standards/regulations: EN60664-1
MountingMounting type: DIN rail mounting
Assembly instructions: in rows with zero spacing
Mounting position: any
NotesGeneral: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met.
Utilization restriction
EMC note: EMC: class A product, see manufacturer's declaration in the download area
Technical Specs
ECLASSECLASS-11.0: 27141152
ECLASS-13.0: 27141152
ECLASS-12.0: 27141152
ETIMETIM 9.0: EC002780
UNSPSCUNSPSC 21.0: 39121400
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Application_note_00005.pdf

Manufacturer_declaration_00973.pdf

Manufacturer_declaration_01806.pdf

Manufacturer_declaration_16346.pdf

Product_information_00033.pdf

Technical_drawing_40627.pdf