Industrial Automation
UM-2KS50/32R/SI/J/ADV551/YCS - Active module
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Product properties | Product type: Interface module Operating mode: 100% operating factor Mechanical service life: 2x 107 cycles Insulation characteristics: Air clearances and creepage distances Overvoltage category: II Pollution degree: 2 |
Electrical properties | Air clearances and creepage distances Rated insulation voltage: 50 VAC Rated surge voltage: 0.5 kV (Functional insulation) Supported controller YOKOGAWA CENTUM VP Suitable I/O card: ADV551 ADV561 NFDV551 NFDV561 |
Input data | Nominal input voltage UN: 24 VDC Input voltage range in reference to UN: 0.8 ... 1.2 Input voltage range: 19.2 VDC ... 28.8 VDC Typical input current at UN: 7 mA Typical response time: 5 ms Typical release time: 6 ms Protective circuit: Freewheeling diode; Freewheeling diode Status display/channel: green LED |
Output data | Switching Contact switching type: 1 N/O contact Type of switch contact: Single contact Contact material: AgSnO Maximum switching voltage: 250 VAC 63 VDC Minimum switching voltage: 5 V (100 mA) Limiting continuous current: 1.5 A (32°C) 1 A (45°C) 0.5 A (50°C) Max. total current of voltage supply: 10 A (50°C) Min. switching current: 1 mA (24V) Interrupting rating (ohmic load) max.: 48 W (24VDC) 20 W (48VDC) 18 W (60VDC) 500 VA (250VAC) |
Connection data | Controller level Connection method: Yokogawa KS-compatible Number of connections: 1 Number of positions: 50 Field level Connection method: Screw connection Number of connections: 32 Number of positions: 2 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 Supply Connection method: Screw connection Number of connections: 4 Number of positions: 2 Conductor cross section rigid: 0.2 mm² ... 4 mm² Conductor cross section flexible: 0.2 mm² ... 2.5 mm² Conductor cross section AWG: 24 ... 12 |
Signaling | Status display present: Yes |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/2fd319e0cc6d544e92c27468d128f13e/-S204x204-FJPG Width: 271.5 mm Height: 127.5 mm Depth: 60.5 mm |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP00 Degree of protection (Installation location): ⥠IP54 (Installation location) Ambient temperature (operation): -20°C ... 50°C Ambient temperature (storage/transport): -20°C ... 80°C Altitude: ⤠2000 m Permissible humidity (operation): 10 % ... 95 % (non-condensing) |
Standards and regulations | Air clearances and creepage distances Standards/regulations: EN60664-1 |
Mounting | Mounting type: DIN rail mounting Assembly instructions: in rows with zero spacing Mounting position: any |
Notes | General: For proper use, the specifications of the installation directive (see Downloads) must be observed. For applications or use with third-party products, the specifications, and the safety and warning instructions of the respective third-party manufacturer must also be met. Utilization restriction EMC note: EMC: class A product, see manufacturer's declaration in the download area |
ECLASS | ECLASS-11.0: 27141152 ECLASS-13.0: 27141152 ECLASS-12.0: 27141152 |
ETIM | ETIM 9.0: EC002780 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products