Not available 
| Notes | General Note: LABS release ââ¬Ã¢ in accordance with test specification VWÃPVÃ3.10.7:2005-0 When connecting the conductor, make sure that the CAPAROC modules are not pulled apart due to tensile force. Gaps must not be created between the modules. Observe the specified conditions for use in potentially explosive areas. Install the device in a suitable approved housing with at least IP54 degree of protection that meets the requirements of IEC/ENÃ60079-0. Also observe the requirements of IEC/ENÃ60079-14. |
| Product properties | Type: Plug-in module Product type: Device circuit breakers Product family: CAPAROC Number of slots: 2 Insulation characteristics Protection class: III Pollution degree: 2 |
| Electrical properties | General Operating voltage: 10 VÃDC ... 30 VÃDC Rated voltage: 12 VÃDC 24 VÃDC Rated current IN: 45 AÃDC (Total current input) Rated surge voltage: 0.5 kV Tripping method: E (electronic) Dielectric strength: 35 VÃDC (Load circuit) Efficiency: > 99 % Closed circuit current I0: typ. 9 mA (no load at 24ÃV) Power dissipation: typ. 0.22 W (no load at 24ÃV) < 1.5 W (in nominal operation at 24ÃV and 45ÃA) Temperature derating: 45 A (Total current atÃ40°C) 30 A (Total current at 65ðC) MTBF (IEC 61709, SN 29500): 18886912.65 h (at 25ðC with 21Ã% load) 5907048.64 h (atÃ40°C with 34.25%Ãload) 933563.97 h (atÃ40°C with 100%Ãload) Voltage drop: 0.03 V (at 45ÃA) Reset Input voltage range: 7 VÃDC ... 30 VÃDC (Reset with falling edge) Current consumption: typ. 0.5 mA (at 24 V DC) Pulse length: ââ°¥ 50 ms Stripping length: 8 mm Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 0.75 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 1.5 mm² Status output Output voltage: max. 30 VÃDC (Input voltageÃñ5% in the event of no error) 0 VÃDC (Error) Output current: max. 20 mA Stripping length: 8 mm Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 0.75 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 1.5 mm² Status outputââ¬Ã¢¹ Output voltage: max. 30 VÃDC (Input voltageÃñ5% when IÃ>80%Ãat at least one channel) Output current: max. 20 mA Stripping length: 8 mm Conductor cross section rigid: 0.2 mm² ... 1.5 mm² Conductor cross section AWG: 24 ... 16 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.2 mm² ... 0.75 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.2 mm² ... 1.5 mm² |
| Connection data | Main circuit IN+ Connection method: Push-in connection Stripping length: 18 mm Conductor cross section rigid: 0.5 mm² ... 16 mm² Conductor cross section AWG: 20 ... 8 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.5 mm² ... 16 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.5 mm² ... 16 mm² Main circuit IN- Connection method: Push-in connection Stripping length: 18 mm Conductor cross section rigid: 0.5 mm² ... 16 mm² Conductor cross section AWG: 20 ... 8 Conductor cross section, flexible, with ferrule, with plastic sleeve: 0.5 mm² ... 16 mm² Conductor cross section flexible, with ferrule without plastic sleeve: 0.5 mm² ... 16 mm² |
| Signaling | Power (PWR) LED green: lit (with no channel errors) lit (Supply voltage in the nominal range) flashing (3Ãx on deactivation of programming lock) Power (PWR) LED red: lit (Supply voltage outside the nominal range) |
| Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/3ced5a3a44f3524a884d85a64ccfc6c8/-S204x204-FJPG Width: 12.4 mm Height: 132.4 mm Depth: 111.3 mm (incl. DIN rail 7.5Ãmm) |
| Material specifications | Material: PA 6 PC Flammability rating according to UL 94: V-0 |
| Environmental and real-life conditions | Ambient conditions Degree of protection: IP20 Ambient temperature (operation): -30°C ... 65°C Ambient temperature (storage/transport): -40°C ... 70°C Altitude: ââ°¤ 4000 m (amsl) Humidity test: 96Ãh, 95Ã%ÃRH, 40ðC Shock (operation): 30g (11 ms period, half-sine shock pulse, according to IEC 60068-2-27) 25g (6Ãms duration, half-sine shock pulse in accordance with IEC 60068-2-27, continuous shock) Vibration (operation): 5g (10 ... 150ÃHz / 10Ãcycles / axis / X,ÃY,ÃZ) |
| Approvals | UL approval Identification: UL/C-UL Listed UL 508 UL 121201 Class I, Division 2, Groups A, B, C, D, T4A ATEX Identification: TÃÃ VÃ22 ATEXÃ8874 X II 3G Ex ec IIC T4 Gc IECEx Identification: IECExÃTURÃ22.0049X II 3G Ex ec IIC T4 Gc UKCAÃExÃ(UKEX) Identification: TÃÃ VÃ22ÃUKEXÃ7109ÃX II 3G Ex ec IIC T4 Gc |
| Standards and regulations | Standards/specifications: ENÃ61000-6-2 ENÃ61000-6-3 ENÃ60068-2-78 ENÃ50178 ENÃ60068-2-27 IEC 60079-7 IEC 60079-0 Note: EMC ââ¬Ã¢ Immunity for industrial areas EMC ââ¬Ã¢ Emission for residential, business and commercial properties and small operations Environmental influences ââ¬Ã¢ Moisture and heat, constant Equipping power installations with electronic equipment Environmental influences ââ¬Ã¢ Shocks Explosive atmospheres ââ¬Ã¢ PartÃ7: Equipment protection by increased safety ââ¬Ã eâ⬠Explosive atmospheres ââ¬Ã¢ PartÃ0: Equipment ââ¬Ã¢ General requirements |
| Mounting | Mounting type: pluggable onto CAPAROC CRâ⬦ current rail |
Description other products
