1411068 PHOENIX CONTACT - Technology Bsa

SACC-M12MSD-4QO SH PN - Data connector

Data connector, PROFINET CAT5 (100 Mbps), 4-position, halogen-free, shielded, Plug straight M12, coding: D, Insulation displacement connection, knurl material: Zinc die-cast, nickel-plated, external cable diameter 5 mm ... 9.7 mm

Product Code: 1411068

Partner cod.: 1411068

PHOENIX CONTACT

Notes	General: This product corresponds to the PROFINET Cabling and Interconnection Technology Guideline for PROFINET regulations, version 2.00, order no: 2.252, Chapter 8.2 Connectors for Outside Environment (Balanced cabling) NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties.
Mounting	Connection method: Insulation displacement connection
Product properties	Product type: Circular connector (cable-side) Sensor type: PROFINET Number of positions: 4 Application: Data No. of cable outlets: 1 Shielded: yes Coding: D Cable outlet: straight Insulation characteristics Overvoltage category: II Degree of pollution: 3
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/acf47b89029351479e7a698ae3768af4/-S204x204-FJPG Length: 58 mm Wrench size, union nut: 15 mm External dimensions Outside diameter: 5 mm ... 9.7 mm Housing Diameter housing: 19 mm
Material specifications	Flammability rating according to UL 94: V0 Seal material: NBR Material of grip body: Zinc die-cast, nickel-plated Contact material: CuSn Contact surface material: Ni/Au Contact carrier material: PA 6.6 Material for screw connection: Zinc die-cast, nickel-plated Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DINEN45545-2 (Risk level HL1 - HL3) Wire insulation material: PVC / PE / PP / rubber
Connection data	Conductor connection Connection method: Insulation displacement connection Connection cross section: 0.25 mm² ... 0.5 mm² (flexible) 0.25 mm² ... 0.5 mm² (solid) Connection cross section AWG: 24 ... 20 (flexible) 24 ... 20 (solid) Tightening torque: 5 Nm (Pressure nut) Pin assignment Contact \| Color (signal designation) \| Contact (optional): 1 (Plug) = YE (TD+) 2 (Plug) = WH (RD+) 3 (Plug) = OG (TD-) 4 (Plug) = BU (RD-)
Electrical properties	Rated surge voltage: 0.8 kV Insulation resistance: Ã¢¥ 100 MÃ© Nominal voltage U_N: 48 VAC 60 VDC Nominal current I_N: 4 A
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢¥ 100
Connector	Connection 1 Head design: Plug Head cable outlet: straight Head thread type: M12 Coding: D
Cable/line	Signal type/category: PROFINET CAT5 (based on IEC 11801), 100 Mbps
Environmental and real-life conditions	Ambient conditions Degree of protection: IP65 IP67 Ambient temperature (operation): -40°C ... 85°C (Plug / socket) Ambient temperature (assembly): -5°C ... 50°C
Standards and regulations	Testing Standards/regulations: PA 6.6: Fire protection in rail vehicles - requirement sets R22, R23, R24, and R26 acc. to DINEN45545-2 (Risk level HL1 - HL3) M12 Standard designation: M12 connector Shock, vibration Standards/specifications: according to IEC 61076-2-101 EN50155:2001