Industrial Automation
Notes | General: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
Product properties | Product type: Contact insert Sensor type: Power Number of positions: 4 Application: Power Seal present: no Shielded: no Coding: T Thread type: M12 Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
Electrical properties | Rated voltage in acc. with IEC 61076-2-101: 630 V Rated surge voltage: 1.5 kV Contact resistance: ⤠3 mé Insulation resistance: ⥠100 Mé Nominal voltage UN: 63 V Nominal current IN: 12 A |
Interfaces | Signal type/category: Power |
Material specifications | Flammability rating according to UL 94: V0 Contact material: CuZn Contact surface material: Au Contact carrier material: PA |
Connector | Connection 1 Head design: Pin Head cable outlet: straight Head thread type: M12 Coding: T |
Cable/line | Signal type/category: Power |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: > 100 |
Environmental and real-life conditions | Ambient conditions Degree of protection (when plugged in): IP67 (correctly plugged in and locked) Degree of protection: IP67 (correctly plugged in and locked) IP67, when plugged in Ambient temperature (operation): -40°C ... 105°C (Plug / socket) -55°C ... 105°C (without mechanical actuation) |
Standards and regulations | M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-111 Note: In line with |
Mounting | Mounting type: PCB mounting Connection method: SMD |
Packaging specifications | Type of packaging: Tray Delivery state: with assembly pad |
Description other products