Industrial Automation
Notes | General: For HEAVYCON housing type B6 to B48, snapinframes necessary, crimp contacts VS-...CD-1,0... (Crimp contacts not included in scope of supply) Connectors may be operated only when there is no load/voltage. The use of guide pins (HC-CST) and sockets (HC-CBU) is recommended to prevent tip collision due to misalignment. |
Mounting | Assembly instructions: To ensure correct use, installation in housing with IP54 protection or better is required |
Product properties | Product type: Modular contact insert Number of positions: 25 Connection profile: 25 Contact numbering: 1 - 25 Application: Signal Number of module slots: 1 No. of power contacts: 0 No. of control contacts: 25 Contact material type: turned Series: HC-M-25 Insulation characteristics Overvoltage category: III Degree of pollution: 3 |
Connection data | Connection technology Connection technology: Crimp connection Conductor connection Conductor cross section: 0.08 mm² ... 0.5 mm² Connection cross section AWG: 28 ... 20 Stripping length of the individual wire: 4.2 mm |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/77bb4d9aa1a7754c9843a0ca70fd3d54/-S204x204-FJPG Width: 34.2 mm Height: 30.65 mm Length: 14.6 mm Mechanical characteristics Minimum housing height: 52 mm Contact diameter: 1 mm |
Electrical properties | Rated voltage (III/2) contacts: 60 V Rated voltage (III/3): 30 V Rated surge voltage (III/2): 0.8 kV Rated surge voltage (III/3): 0.8 kV Rated surge voltage: 0.8 kV Rated current: 4 A |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: ≥ 500 |
Material specifications | Flammability rating according to UL 94: V0 Contact material: Copper alloy Contact surface material: Au Contact carrier material: PC Standards/regulations: PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -40°C ... 125°C |
Standards and regulations | Testing Standards/regulations: PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) |
ECLASS | ECLASS-11.0: 27440217 ECLASS-12.0: 27440217 ECLASS-13.0: 27440217 |
ETIM | ETIM 9.0: EC000438 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products