Industrial Automation

Mechatronics

Industrial Safety

Panel Components

Sensors and Systems of Vision

Pneumatics

Network Comunications

Automation Cables

Design Software

Access services

Enter your reserved area

Access B2B
Log in to your account

Access services

Enter your reserved area

Access B2B
Log in to your account
Country|
||
PHOENIX CONTACT 1416209
PHOENIX CONTACT 1416209
PHOENIX CONTACTNot available

VS-OE-M12FSBP-93C-LI/2,0 - Device connector, rear mounting

Device connector, rear mounting, PROFINET CAT5 (100 Mbps), EtherCAT® CAT5 (100 Mbps), 4-position halogen-free, green RAL 6018, shielded, Socket, straight, M12, coding: D, on free cable end, Rear mounting, Cable lug connection, cable length: 2 m, Alternative product in accordance with RoHS II without Exemption6c (Pb<0.1%) item no.: 1239110
Product Code: 1416209
Partner cod.: 1416209
PHOENIX CONTACT


Diminuisci la quantità
Aumenta la quantità
Tecnichal data
Technical Specs
Description
Download
Tecnichal data
NotesGeneral: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration.
Safety note
Safety note: WARNING: The connectors may not be plugged in or disconnected under load. Ignoring the warning or improper use may damage persons and/or property.
• WARNING: Commission properly functioning products only. The products must be regularly inspected for damage. Decommission defective products immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate the product. They must observe the following safety notes. The qualified personnel must be familiar with the basics of electrical engineering. They must be able to recognize and prevent danger. The relevant symbol on the packaging indicates that only personnel familiar with electrical engineering are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and electrical device engineering.
• When operating the connectors in outdoor applications, they must be separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the standards listed (e.g. the ones listed in the product accessories online at phoenixcontact.com/products).
• When using the product in direct connection with third-party manufacturers, the user is responsible.
• For operating voltages > 50V AC, conductive connector housings must be grounded
• Ensure that when laying the cable, the tensile load on the connectors does not exceed the upper limit specified in the standards.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• Only use tools recommended by PhoenixContact
• Use a protective cap to protect connectors that are not in use. The suitable accessories are available online in the accessory section of the product at phoenixcontact.com/products
• Ensure that the protective or functional ground has been properly connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are applicable when combining several circuits in a cable and/or connector
• The connector warms up in normal operation. Depending on the ambient conditions, the surface of the connector can continue to warm up. In this case, the user is responsible for posting warnings (e.g. DIN EN ISO 13732-1:2008-12).
Product propertiesProduct type: Data cable preassembled
Sensor type: PROFINET
Number of positions: 4
Application: Data
No. of cable outlets: 1
Shielded: yes
Coding: D
Insulation characteristics
Overvoltage category: II
Degree of pollution: 3
InterfacesBus system: PROFINET
Signal type/category: PROFINET CAT5 (IEC 11801:2002), 100 Mbps
EtherCAT® CAT5 (IEC 11801), 100 Mbps
Electrical propertiesRated surge voltage: 2.5 kV
Contact resistance: ≤ 3 mΩ
Insulation resistance: ≥ 100 MΩ
Nominal voltage UN: 250 V
Nominal current IN: 4 A (Plug/socket in accordance with IEC 61076-2-101, cable technical data is to be observed)
Transmission medium: Copper
Transmission characteristics (category): CAT5 (IEC 11801:2002)
Mechanical propertiesMechanical data
Insertion/withdrawal cycles: ≥ 100
Material specificationsFlammability rating according to UL 94: V0
Seal material: FKM
Contact material: CuZn
Contact surface material: Ni/Au
Contact carrier material: PA 6.6
Material for screw connection: Brass, nickel-plated
Connection dataConnection technology
Connection method: Cable lug connection
Conductor connection
Contact connection type: Socket
Connection method: Cable lug connection
Tightening torque: 2 Nm ... 3 Nm (Installation-side)
ConnectorConnection 1
Head design: Socket
Head cable outlet: straight
Head thread type: M12
Coding: D
Connection 2
Head design: free cable end
Cable/lineCable length: 2 m
PROFINET drag chain CAT5[93C]
Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/9641ad6bfe7a694da352f4faa5bb90c4/-S204x204-FJPG
Cable weight: 61 kg/km
Number of positions: 4
Shielded: yes
Cable type: PROFINET drag chain CAT5[93C]
Conductor structure: 1x4xAWG22/7, SF/TQ
Signal runtime: 5.3 ns/m
Signal speed: 0.66 c
Conductor structure signal line: 7x 0.25 mm
AWG signal line: 22
Conductor cross section: 4x 0.34 mm²
Wire diameter incl. insulation: 1.5 mm
External cable diameter: 6.5 mm ±0.2mm
Outer sheath, material: PUR
External sheath, color: green RAL 6018
Conductor material: Tin-plated Cu litz wires
Material wire insulation: PE
Single wire, color: white, yellow, blue, orange
Thickness, outer sheath: approx. 0.9 mm
Overall twist: Star quad
Optical shield covering: 85 %
Insulation resistance: ≥ 500 MΩ*km
Coupling resistance: ≤ 20.00 mΩ/m (at 10 MHz)
Loop resistance: ≤ 120.00 Ω/km
Wave impedance: 100 Ω ±15Ω (at 1 ... 100 MHz)
Nominal voltage, cable: 600 V (UL rating)
Test voltage Core/Core: 2000 V (50Hz, 1min.)
Test voltage Core/Shield: 2000 V (50Hz, 1min.)
Minimum bending radius, fixed installation: 5 x D
Minimum bending radius, flexible installation: 7.5 x D
Smallest bending radius, fixed installation: 33 mm
Smallest bending radius, movable installation: 49 mm
Max. bending cycles: 3000000
Tensile strength: ≤ 150 N
Torsion force: ± 30°/m
Near end crosstalk attenuation (NEXT): 80 dB (with 1 MHz)
76 dB (at 4 МHz)
70 dB (at 10 MHz)
65 dB (at 16 MHz)
63 dB (at 20МHz)
60 dB (at 31.25МHz)
55 dB (at 62.5МHz)
50 dB (at 100 MHz)
Shield attenuation: 2.1 dB (with 1 MHz)
4 dB (at 4 МHz)
6.3 dB (at 10 MHz)
8 dB (at 16 MHz)
9 dB (at 20МHz)
11.4 dB (at 31.25МHz)
16.5 dB (at 62.5МHz)
21.3 dB (at 100 MHz)
Halogen-free: yes
Flame resistance: according to IEC 60332-1-2
Resistance to oil: in accordance with DINEN60811-2-1
Other resistance: UV resistant
Special properties: Electrical properties in accordance with EN 50288-2-2
Ambient temperature (operation): -40°C ... 70°C (cable, fixed installation)
-40°C ... 70°C (Cable, flexible installation)
Ambient temperature (installation): -20°C ... 60°C
Environmental and real-life conditionsAmbient conditions
Degree of protection: IP67 (When plugged in)
IP65 (When plugged in)
IP65/IP67
Ambient temperature (operation): -25°C ... 85°C (Plug / socket)
-40°C ... 85°C (without mechanical actuation)
Standards and regulationsM12
Standard designation: M12 connector
Standards/specifications: IEC 61076-2-101
Technical Specs
ECLASSECLASS-11.0: 27060308
ECLASS-12.0: 27060308
ECLASS-13.0: 27060308
ETIMETIM 9.0: EC002599
UNSPSCUNSPSC 21.0: 26121600
Description
Assembled PROFINET cable, CAT5e, shielded, star quad, AWG 22 flexible cable conduit capable (7-wire), RAL 6018 (yellow-green), M12 flush-type socket, rear/screw mounting with M16 thread on free conductor end, line, length 2 m
Download
PER SCARICARE I DOCUMENTI E' NECESSARIO EFFETTUARE L'ACCESSO AL SITO

Design-In_00002.pdf

Manufacturer_declaration_01358.pdf

Manufacturer_declaration_02418.pdf

Manufacturer_declaration_07936.pdf

Package_slip_02241.pdf

Technical_drawing_14306.pdf