1417308 PHOENIX CONTACT - Technology Bsa

HC-M-DSUB 09-CT-F - Contact insert module

Contact insert module, number of positions: 9, type : D-SUB9, Socket, Crimp connection, 48 V, 1 A, 0.08 mm²...0.5 mm², application: Data, without crimp contacts

Product Code: 1417308

Partner cod.: 1417308

PHOENIX CONTACT

Notes	General: For HEAVYCON housing types B6 to B48, HC-M-B... snap-in frames and CUC-DSC-J1BAU-S/DSC.. crimp contacts in accordance with DIN 41652 are required. Crimp contacts are not supplied as standard. Connectors may be operated only when there is no load/voltage. The use of guide pins (HC-CST) and sockets (HC-CBU) is recommended to prevent tip collision due to misalignment.
Mounting	Assembly instructions: To ensure correct use, installation in housing with IP54 protection or better is required Connection method: Crimp connection
Product properties	Product type: Modular contact insert Number of positions: 9 Connection profile: 9 Contact numbering: 1 - 9 Application: Data Number of module slots: 1 Type: D-SUB9 Contact material type: turned Series: HC-M-DSUB-C Insulation characteristics Overvoltage category: III Degree of pollution: 3
Connection data	Connection technology Connection technology: Crimp connection Clamping range of the strain relief clip: 4.00 mm ... 7.00 mm Conductor connection Conductor cross section: 0.08 mm² ... 0.5 mm² Connection cross section AWG: 28 ... 20 Stripping length of the individual wire: 4.2 mm
Dimensions	Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/deb990216c79724ca6014a707cd68f3b/-S204x204-FJPG Width: 34.2 mm Height: 35.2 mm Length: 14.6 mm Clamping range of the strain relief clip: 4.00 mm ... 7.00 mm Mechanical characteristics Minimum housing height: 52 mm Contact diameter: 1 mm
Electrical properties	Rated voltage (III/3): 48 V Rated surge voltage: 0.8 kV Rated current: 1 A
Mechanical properties	Mechanical data Insertion/withdrawal cycles: Ã¢¥ 500
Material specifications	Material: Zinc alloy Flammability rating according to UL 94: V0 Contact material: Copper alloy Contact surface material: Au Contact carrier material: PC Standards/regulations: PC: Fire protection in rail vehicles - requirement set R22 acc. to DINEN45545-2 (Risk level HL1 - HL2) PC: Fire protection in rail vehicles - requirement set R23 acc. to DINEN45545-2 (Risk level HL1 - HL3)
Environmental and real-life conditions	Ambient conditions Ambient temperature (operation): -40°C ... 125°C
Standards and regulations	Testing Standards/regulations: PC: Fire protection in rail vehicles - requirement set R22 acc. to DINEN45545-2 (Risk level HL1 - HL2) PC: Fire protection in rail vehicles - requirement set R23 acc. to DINEN45545-2 (Risk level HL1 - HL3)