Industrial Automation
HC-M-03-PN-M-F - Contact insert module
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
![](https://www.technologybsa.com/wp-content/uploads/2023/08/copia.png)
Notes | General: For HEAVYCON ADVANCE housing type B6 to B24 and HEAVYCON housing type B6 to B48. HEAVYCON HC-M-B...-MF... module carrier frame required, HC-M-PN... pneumatic pins and sockets are not supplied as standard. Connectors may be operated only when there is no load/voltage. The use of guide pins (HC-CST) and sockets (HC-CBU) is recommended to prevent tip collision due to misalignment. |
Product properties | Product type: Pneumatic insert, modular Number of positions: 3 Connection profile: 3 Contact numbering: 1 - 3 Application: Pneumatics Number of module slots: 1 Integrated valve: No Series: HC-M-03-PN |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/1c0c96ace2b9dc4aa34983b305cbd09a/-S204x204-FJPG Width: 34.1 mm Height: 27.2 mm Length: 14.6 mm Mechanical characteristics Internal diameter of pressure hose connection: 1.6 mm 3 mm 4 mm Contact diameter: 5.2 mm |
Material specifications | Flammability rating according to UL 94: V0 Contact carrier material: PC Standards/regulations: PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: ⥠500 |
Environmental and real-life conditions | Ambient conditions Ambient temperature (operation): -40°C ... 80°C |
Standards and regulations | Testing Standards/regulations: PC: Fire protection in rail vehicles - requirement sets R22, R23, and R24 acc. to DINEN45545-2 (Risk level HL1 - HL3) |
Mounting | Assembly instructions: To ensure correct use, installation in housing with IP54 protection or better is required - Snap the pneumatic contact and module together. Insert the contact into the module from the front - Place the modules assembled with the contacts in the module carrier frame. - The pneumatic tubes are pushed onto the pneumatic contact from the back of the module. The medium-sized module slots and sleeves/coupling housing with straight cable outlet direction are recommended. |
ECLASS | ECLASS-11.0: 27440220 ECLASS-12.0: 27440220 ECLASS-13.0: 27440220 |
ETIM | ETIM 9.0: EC000438 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products