Industrial Automation
Notes | General: NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties. |
Mounting | Connection method: Insulation displacement connection |
Product properties | Product type: Circular connector (cable-side) Sensor type: Universal Number of positions: 4 No. of cable outlets: 1 Shielded: no Coding: A Cable outlet: straight Insulation characteristics Overvoltage category: II Degree of pollution: 3 |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/4728567cec7a49498c3ac32899cb20d9/-S204x204-FJPG Length: 60 mm Wrench size, union nut: 16 mm Wrench size, counter nut: 15 mm External dimensions Outside diameter: 4 mm ... 7 mm |
Material specifications | Flammability rating according to UL 94: V0 Seal material: FKM Material of grip body: PA-GF Contact material: CuSn Contact surface material: Ni/Au Contact carrier material: PA 6.6 Material for screw connection: Stainless steel 1.4404 Wire insulation material: PVC / PE / PP / rubber |
Connection data | Conductor connection Connection method: Insulation displacement connection Connection cross section: 0.14 mm² ... 0.75 mm² (flexible) Connection cross section AWG: 26 ... 20 (flexible) Tightening torque: 0.4 Nm (M12 knurl) 4 Nm (Pressure nut) Pin assignment Contact | Color (signal designation) | Contact (optional): 1 = BN 2 = WH 3 = BU 4 = BK |
Electrical properties | Rated surge voltage: 2.5 kV Insulation resistance: ⥠100 Mé Nominal voltage UN: 48 VAC 60 VDC Nominal current IN: 4 A |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: ⥠100 |
Connector | Connection 1 Head design: Plug Head cable outlet: straight Head thread type: M12 Coding: A |
Cable/line | Signal type/category: Universal |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 Ambient temperature (operation): -40°C ... 85°C (Plug / socket) Ambient temperature (assembly): -5°C ... 50°C (During assembly) |
Standards and regulations | M12 Standard designation: M12 connector Standards/specifications: according to IEC 61076-2-101 |
Description other products