Industrial Automation
Notes | General: The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. |
Product properties | Number of positions: 8 No. of cable outlets: 1 Seal present: no Shielded: no Coding: A Thread type: M12 Insulation characteristics Overvoltage category: II Degree of pollution: 3 |
Electrical properties | Rated surge voltage: 0.8 kV Contact resistance: ⤠3 mé Insulation resistance: ⥠100 Mé Nominal voltage UN: 30 V Nominal current IN: 2 A |
Signaling | Status display: No Status display present: No |
Material specifications | Flammability rating according to UL 94: V0 Contact carrier material: PA 6.6 |
Connector | Connection 1 Head design: Pin Head cable outlet: straight Head thread type: M12 Coding: A |
Cable/line | Cable cross section: 0.25 mm² |
Mechanical properties | Mechanical data Insertion/withdrawal cycles: > 100 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP67 Ambient temperature (operation): -25°C ... 85°C (Plug / socket) -40°C ... 85°C (without mechanical actuation) |
Standards and regulations | M12 Standard designation: M12 connector Standards/specifications: IEC 61076-2-101 |
Mounting | Mounting type: Front mounting Square flange 25 mm side length Assembly instructions: 25 mm side length Connection method: Crimp connection |
ECLASS | ECLASS-11.0: 27440223 ECLASS-12.0: 27440116 ECLASS-13.0: 27440223 |
ETIM | ETIM 9.0: EC003557 |
UNSPSC | UNSPSC 21.0: 39121400 |
Description other products