Industrial Automation
Notes | General: When connecting the signal lines to the black PCB terminal blocks, please use a 0.4 x 2.0 mm screwdriver. The black PCB terminal blocks only require a minimal amount of operating force. Screwdriver: SZS 0,4X2,0 - 1205202 Using larger screwdrivers or excessive force may damage the PCB terminal blocks. When using ferrules, the wires can be inserted straight into the PCB terminal blocks without opening the clamping area. Item 1412058 SACB-4/ 8-L-PT SCO P is a version with the same connection cross section for signals and energy supply from 0.2mm² to 1mm². This sensor/actuator box with double slot assignment also features a master cable connection with Push-in connection terminal blocks. NOTE: Observe the permissible bending radii when laying conductors, since the degree of protection may be put in jeopardy if the bending forces are too high. Alleviate mechanical loads upstream of the connector, e.g.by using cable ties. Unused slots are to be sealed off prior to commissioning. Suitable sealing elements are to be found under "Accessories". |
Product properties | Product type: Distributor boxes with M8 to M12 slots Number of positions: 4 Application: Standard Number of slots: 4 Coding: A LED: yes |
Material specifications | Material: PBT PUR Flammability rating according to UL 94: V0 Seal material O-ring: NBR Contact material: Cu alloy Contact surface material: gold-plated Contact carrier material: PA |
Dimensions | Dimensional drawing: https://dam-mdc.phoenixcontact.com/rendition/156443151564/323be259cc14244db16f61141d96055a/-S204x204-FJPG Width: 54 mm Height: 43 mm Length: 117 mm |
Connection data | Conductor connection Connection method: Spring-cage connection Stripping length: 6 mm 10 mm Conductor cross section Flexible signal line: 0.2 mm² ... 0.5 mm² Conductor cross section Flexible power supply: 0.2 mm² ... 1.5 mm² Connection cross section AWG Flexible signal line: 24 ... 20 Connection cross section AWG Flexible power supply: 24 ... 16 Tightening torque, cover screw: 1 Nm Tightening torque slot sensor/actuator cable: 0.4 Nm Tightening torque of mounting screw for fixing the housing: 0.5 Nm Pin assignment Slot/position = Wire color or connection: 1 / 4 (A)=WH 2 / 4 (A)=GN 3 / 4 (A)=YE 4 / 4 (A)=GY 1-4 / 1 (+ 24 V)=BN 1-4 / 3 (0 V)=BU 1-4 / 5 (PE)=GNYE |
Signaling | Status display present: Yes |
Electrical properties | Max. operating voltage Umax: 30 VDC Local diagnostics: Supply voltage Green LED Status display I/O Yellow LED Nominal voltage UN: 24 VDC Rated current, total: 12 A Max. current carrying capacity per path: 2 A Current carrying capacity per slot: 4 A |
Cable/line | Sensor/actuator connection system: M12-SPEEDCON-socket Connection method: Spring-cage connection External cable diameter: 7 mm ... 12 mm Stripping length (signal): 6 mm Stripping length (power): 10 mm Stripping length for sheath: 50 mm (Master cable) Tightening torque, cover screw: 1 Nm Tightening torque of mounting screw for fixing the housing: 0.5 Nm Tightening torque slot sensor/actuator cable: 0.4 Nm Tightening torque, union nut: 2.5 Nm |
Standards and regulations | Standard designation: M12 connector Standards/specifications: IEC 61076-2-101 |
Environmental and real-life conditions | Ambient conditions Degree of protection: IP65 IP67 Ambient temperature (operation): -25°C ... 80°C |
ECLASS | ECLASS-11.0: 27440111 ECLASS-12.0: 27440111 ECLASS-13.0: 27440111 |
ETIM | ETIM 9.0: EC003558 |
UNSPSC | UNSPSC 21.0: 31251500 |
Description other products